English / USA
Replacing a broken rewind spring
:
Remove the rope rotor as described
under "Replacing Starter Rope and
Rewind Spring".
The bits of spring might still be
under tension and could fly apart
when you take them out of the
housing. To reduce risk of injury,
wear eye and face protection and
work gloves.
3
4
5
:
:
Remove spring housing and the
parts of the spring.
Lubricate the new spring with a few
drops of non-resinous oil.
:
:
Refit the pawl (5) in the rotor.
:
Place the new spring housing on the
recesses (arrows) – bottom plate
must face up.
Fit the washer (4) on the starter
post.
:
:
Push the spring housing into the
starter cover.
:
Use a screwdriver or suitable pliers
to install spring clip (3) on starter
post and engage it on the pawl's peg
Install the rope rotor as described
under "Tensioning the rewind
spring".
–
the spring clip must point
counterclockwise clockwise as
shown in the illustration.
:
If the spring pops out of the housing
during installation: Refit it in the
counterclockwise direction, starting
outside and working inward.
:
Go to "Tensioning the rewind
spring".
FS 90, FS 90 R
45
| Categories | Blower Vacuum and Sweeper Manuals, STIHL Trimmer Manuals, Trimmer Manuals |
|---|---|
| Tags | STIHL FS 90 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Trimmer |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)