STIHL SR 430 450 Blower Power Sprayer Owners Manual

English
Strictly follow the maintenance and
repair instructions in the appropriate
section in this instruction manual.
Please refer to the maintenance chart in
this instruction manual.
Assembling the Unit
Warning!
Do not operate your power tool if the
muffler is damaged, missing or modi-
fied. An improperly maintained muffler
will increase the risk of fire and hearing
loss. If your muffler was equipped with a
spark-arresting screen to reduce the
risk of fire, never operate your power
tool if the screen is missing or damaged.
Remember that the risk of forest fires is
greater in hot or dry weather.
Hose and throttle cable, and the
metering unit's operating cable on
the SR 450, come connected
ready for use and must not be
kinked while assembling the
machine.
Warning!
Always stop the engine and make sure
that the fan is stopped before doing any
maintenance or repair work or cleaning
the power tool. Do not attempt any
maintenance or repair work not
The combination wrench and
screwdriver are in the supplied
accessory bag.
described in this instruction manual.
Have such work performed by your
STIHL servicing dealer only.
Tighten all nuts, bolts and screws except
the carburetor adjustment screws after
each use.
Fitting the pleated hose on the blower
tube
Do not clean your machine with a
pressure washer. The solid jet of water
may damage parts of the machine.
For maintenance items please also refer
to the maintenance chart in this
instruction manual.
Store the power tool in a dry and high or
locked location out of reach of children.
Warning!
1
2
Before storing for longer than a few
days, always empty the fuel tank. See
chapter "Storing the machine" in this
instruction manual.
Use the specified spark plug and make
sure it and the ignition lead are always
clean and in good condition. Always
press spark plug boot snugly onto spark
plug terminal of the proper size. (Note: If
terminal has detachable SAE adapter
nut, it must be securely attached.) A
loose connection between spark plug
terminal and the ignition wire connector
in the boot may create arcing that could
ignite combustible fumes and cause a
fire.
Store fuel in an approved and properly
labeled safety-type canister only. Take
care when handling gasoline! For health
and safety reasons, avoid direct contact
with the skin and avoid inhaling fuel
vapor!
N
Slide the wide hose clamp (1) onto
the blower tube (2) and line it up.
3
2
Warning!
4
Never test the ignition system with the
boot removed from the spark plug or
with a removed spark plug, since uncon-
tained sparking may cause a fire.
N
N
Push the ring seal (3) (wide lip
facing left) onto the blower tube (2).
Push the pleated hose (4) over the
ring seal (3).
1
2
SR 430, SR 450
Product Specification
CategoriesBackpack Sprayer Manuals, Blower Vacuum and Sweeper Manuals, STIHL Backpack Sprayer Manuals, STIHL Blower and Vacuum Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 100 pages
LanguageEnglish, Español
Product BrandSTIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Blower Vacuum
Document File TypePDF
Publisherstihl.com
Wikipedia's PageStihl
CopyrightAttribution Non-commercial
(1 votes, average: 4 out of 4)
Lawn and Garden readers have rated STIHL SR 430 450 Blower Power Sprayer Owners Manual 4.0 out of 4.0 based on 1 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

STIHL SR 430 450 Blower Power Sprayer Owners Manual SKU UPC Model
Clyde on Jul 31, 2017.

Works great only have a couple a problem with the spark arrester along the way other Than that it's ran for a champ for me for almost 2 years now


Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website