Maintenance and Service
1.
lower cutting decks, stop engine, apply parking brake
and remove key from the ignition switch.
Before servicing or making machine adjustments,
12.Keep bodyandhandsawayfrompinholeleaksinhy-
draulic lines that eject high pressure hydraulic fluid. Use
cardboard or paper to find hydraulic leaks. Hydraulic
fluid escaping under pressure can penetrate skin and
cause injury. Fluid accidentally injected into the skin
must be surgically removed within a few hours by a doc-
tor familiar with this form of injury or gangrene may re-
sult.
2.
keeping all nuts, bolts and screws tight.
Make sure machine is in safe operating condition by
3.
engine crankcase.
Shut engine off before checking or adding oil to the
13.Before
disconnecting or performing any work on the
4.
free of excessive grease, grass, leaves and dirt. Clean
protective screen on machine frequently.
To reduce potential fire hazard, keep engine area
hydraulic system, all pressure in system must be re-
lieved by stopping engine and lowering the cutting
decks to the ground.
5.
wherethereisanopenflame,suchasnearawaterheat-
er or furnace.
Never store the machine or fuel container inside
14.Make
components are correctly installed, and all fuel hoses
are in good condition before starting engine.
sure all engine fuel system connectors and
6.
setting.Toassuresafety andaccuracy,checkmaximum
engine speed.
Do not overspeed the engine by changing governor
15.Keep
body andhands away from leaks inenginefuel
injection lines. Use cardboard or paper to find high pres-
surefuelleaksiftheymayexist.Leakingfuelunderpres-
sure can penetrate skin and cause injury.
7.
Disconnect batteries before servicing the machine.
Disconnect negative battery cables first and positive
cables last. If battery voltage is required for trouble-
shooting or test procedures, temporarily connect the
batteries. Reconnect positive battery cables first and
negative cables last.
16.If
engine must be running to perform maintenance or
an adjustment, keep hands, feet, clothing and other
parts of the body away from cutting decks and other
moving parts. Keep bystanders away.
17.At
the time of manufacture, the machine conformed
8.
Avoid contact with skin, eyes and clothing. Protect your
face, eyes and clothing when working with a battery.
Battery acid is poisonous and can cause burns.
to the safety standards for riding mowers. To assure op-
timum performance and continued safety certification of
the machine, use genuine Toro replacement parts and
accessories.Replacementpartsandaccessories made
by other manufacturers may result in non-conformance
with the safety standards, and the warranty may be
voided.
9.
and flames away from the battery.
Battery gases can explode. Keep cigarettes, sparks
10.When
changing attachments, tires or performing
otherservicethatrequires themachine toberaised,use
correct jacks, hoists and supports. Make sure machine
is parked on a solid level surface such as a concrete
floor. Prior to raising the machine, remove any attach-
mentsthatmayinterferewiththesafeandproperraising
ofthe machine. Always chock or block wheels. Use suit-
able jack stands to support the raised machine. If the
machine is not properly supported by jack stands, the
machine may move or fall, which may result in personal
injury (see Jacking Instructions in this chapter).
18.When
welding on machine, disconnect all battery
cables to prevent damage to machine electronic equip-
ment. Disconnect negative battery cable first and posi-
tive cable last. Disconnect and remove engine
electronic control module (ECM) from engine before
welding on the machine. Also, attach welder ground
cable no more than two (2) feet (0.61 meters) from the
welding location.
19.If
major repairs are ever needed or assistance is de-
sired, contact an Authorized Toro Distributor.
11.
Make sureall hydraulic line connectors are tight,and
all hydraulic hoses and lines are in good condition be-
fore applying pressure to the system.
Safety
Page 1 -- 4
Groundsmaster 5900/5910
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 5900, Toro Groundsmaster 5910 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)