Toro 08159SL Groundsmaster 5900 5910 Service Manual

Lift Control Manifold
FRONT
RIGHT
106
(12.0
to 159 in--lb
to 17.9 N--m)
2
1
5
4
6
7
3
9
8
Figure 90
1.
2.
3.
Battery
Lift control manifold
Water separator assembly
4.
5.
6.
Flange head screw (3 used)
Flange head screw (4 used)
Mounting plate
7.
8.
9.
Hydraulic filter
Flange nut (3 used)
Frame
NOTE:  Theportsontheliftcontrolmanifold    aremarked
for easy identification  of components. Example: P1 is
the supply port from the gear pump and FD is the flow
divider cartridge location  (see Hydraulic Schematic in
Chapter 10 -- Foldout Drawings to identify the function
of the hydraulic lines and cartridge valves at each port).
4.  For assembly purposes, label wire harness leads for
manifold solenoids. Disconnect  wire harness connec-
tors from solenoids on manifold.
5.
Disconnect all hydraulic lines from manifold and put
caps or plugs on open hydraulic lines and fittings. Label
disconnected hydraulic lines for proper assembly.
Removal (Fig. 90)
6.
Remove hydraulic  manifold  from the  frame using
1.
Installing Hydraulic System Components at the begin-
ning of the Service and Repairs section of this chapter.
Read the  General Precautions  for Removing  and
Figure 90 as guide.
IMPORTANT: An orifice  is placed beneath  the 90o
hydraulic fittings  in the control  manifold C1--OR1
and C5--OR2 ports.  If either of these fittings  is re-
moved from manifold, make sure to remove orifice
and label its position for assembly purposes.
2.
cess to lift control manifold.
Raise hood and remove RH side  panel to gain ac-
3.
To prevent contamination of hydraulic system during
manifold removal, thoroughly clean exterior of manifold
and fittings.
Hydraulic System
Page 4 -- 124
Groundsmaster 5900/5910
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 374 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website