Toro Multi Pro 5800 Specifications GROUND Specifications

Multi Pro®5800 Specifications
MULTI PRO 5800-D,  MODEL 41593
ENGINE
Kubota, V1505 N/A, Vertical, 4 cylinder, 4 cycle, water-cooled, diesel, 1.498L. Rated output 35.5 hp (26.5 kW). Biodiesel B-20 compatible.
Mid-mounted 3.3 quart radiator with oil cooler mounted in front
COOLING  SYSTEM
10.6 gallon (40L) steel fuel tank with 1.5”opening on drivers side for fueling; Vented fuel cap with mechanical float style fuel gauge; In-line replacement filter (diesel
fuel).
FUEL SYSTEM
TRACTION  SYSTEM
Servo-controlled hydrostatic system driving double planetary gear reduction rear wheel drives; Foot pedal control of forward/reverse ground speed
Forward: 0-10 mph (0-16.1 km/h). Reverse: 0-4 mph (0-6.4 km/h).
GROUND SPEED/CLEARANCE
Front: 23” diameter rounded profile, 4 ply rated tire with turf tread pattern; Wheel has 5 hole bolt pattern for lugs.   Rear: 26.5” diameter rounded profile, 4
ply rated tire with turf tread pattern; Wheel has 8 hole bolt pattern for lugs
TIRES
BRAKES
MAIN FRAME
SUSPENSION
STEERING
2 wheel mechanical cable operated multi disc wet brakes with additional hydrostatic braking through drive train
Welded high strength steel tubular construction
Front: Straight axle with twin independent leaf springs and dual shock absorbers.   Rear: Rigid with high floatation tires.
Fully hydraulic with dedicated power source 48° steering angle
Ignition key switch; Voltage level warning lamp; Coolant temperature warning lamp; Glow plug indicator lamp; Engine oil pressure warning lamp; Spray system
pressure gauge; Spray pressure control switch.
GAUGES/INDICATORS
CONTROLS
Throttle control; Spray pump control switch; Jet agitator switch; Individual boom On/Off switches; Indicator lights on pump Switch, Agitator and boom switches;
Headlight Switch; Hour Meter; Speed control switch with indicator light; Plugs for accessory switches
SEATS
ELECTRICAL  FEATURES
LIGHTS
Bucket seats with easy tilt forward bracket; removable bolts allow for adjustment for various seat positions; Seats are interchangeable from left to right
12 volt. 690 cold cranking amps at 0° F (-18° C). 12 volt, 40 Amp alternator. Dash mounted ignition switch, with glow plug timing circuit.
Rectangular 12 volt halogen sealed beam headlights.
SOUND  LEVEL
86 dB(A) at operator ear under normal operation
Drive-on weight: 2,700 lbs. (1,225 kg), Shipping weight: 2,700 lbs. (1,225 kg), Empty vehicle: 2,700 lbs. (1,225 kg), Full w/operator: 5525 lbs.(2506 kg),
MGVW: 6525 lbs.(2960 kg).
WEIGHT
Measurements with spray system—
Overall Length:
Overall Width:
Height:
154" (391 cm) booms forward.
81" (175 cm) booms forward.
57.5" (146 cm)
Turning Diameter:
                             
15’-7” (4.7m) front tire inside
26’-7” (8.1m) front tire outside
DIMENSIONS
WARRANTY
Two-year limited warranty. Refer to the Operator’s Manual for further details.
SAE 2258 Dec 2003 and EU 98/37EC Machinery Directive
CERTIFICATION
SPRAYER SPECIFICATIONS
SOLUTION  TANK
RATED CAPACITY
SPRAY PUMP
AGITATOR
High density, impact resistant polyethylene with large 16” (41cm) fill well
300 gallon (1,136 liter)
Diaphragm adjustable hydraulic drive; 40 gpm (151 lpm), 220 psi (1500 kpa) maximums
4, side-mounted jet agitation nozzles for full tank agitation.
Throttle lock, agitation on/off switch, master pump switch, boom raise/lower rocker switches. Boom section on/off rocker switches, manual/automatic
mode switch and engine speed control.
CONTROLS
Pro Control   XP Spray System console Model Number 41604; Speedometer Kit Part Number 106-4839; Turf Sprayer Kit (CE) 106-4841; Heat Shield Blanket
TM
Kit 106-4843; Eductor (Clean Load) Model Number 41612; Rinse Kit Model Number 41614; Electric Hose Reel Kit Model Number 41613; Spray Gun Kit
Model Number 41615; Foam Marker Model Number 41228; Ultra Sonic Boom Kit Model Number  41615; Cab with A/C (From Custom Products); Sunshade
(From Custom Products); Kubota 60 Amp alternator kit Part Number 117-5540; Toro Covered Boom Shroud Kit Model Number 41602.
OPTIONS
Nozzles: Single Nozzle Kit Model Number 41024; Homologation Kit Model Number 41603
OPEN BOOM  (STANDARD)
BOOM ASSEMBLY
SPRAY NOZZLES
18.5’ three sections, triangular truss style open boom.
Drift reduction, quick-disconnect with diaphragm check valves. Triple turret mount.
Specifications subject to change. Please contact  your Toro distributor for details.
A Safety Reminder: Prior to any application, know the chemical content and the manufacturer’s
recommendation for protective clothing. Always wear proper clothing and mask when applying chemicals.
Product Specification
CategoriesLawn Mower Manual, Toro Lawn Mower Manual
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 2 pages
Document TypeSpecifications
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website