Install sprinkler to lateral line using a triple swing joint
connection as shown. Position top of sprinkler cap flush
with finish grade. Tilt sprinkler as required to maintain perpendicular alignment with finish
grade. If installing a part-circle sprinkler, tighten sprinkler on swing joint aligning long rib on
body with left watering border. The sprinkler arc is factory preset to 180°. If arc adjustment is
required, see arc adjustment instructions below.
Installation Instructions
Series Sprinkler
Sprinkler Installation
2001
®
R
Specifications
•
•
Pressure Range: 40 – 100 PSI (2.8 – 7.0 kg/cm ) (276 – 689 kPa)
2
Nozzle Performance
Swing Joint Components
Finish Grade
@
Optimum Pressure: 60 PSI (4.2 kg/cm ) (414 kPa)
2
1
2
3
4
5
– 1" x 3" (25mm x 76mm) Nipple
– 1" (25mm) Ell
– 1" (25mm) Street Ell
– 1" x 12" (25mm x 305mm) Nipple
– Lateral Tee
90
°
Main
Nozzle
Color
Inner
Nozzle
Radius
in Feet
GPM
Prec. Rate*
In./Hr.
Radius
in Meters
LPM
Prec. Rate*
mm/Hr.
#6
Yellow
Orange
Brown
Gray
Gray
Gray
Red
Red
Red
Red
51
52
53
57
59
60
7.1
10.2
13.0
16.1
18.9
23.3
0.23
0.31
0.39
0.41
0.45
0.54
15.6
15.9
16.2
17.4
18.0
18.3
26.9
38.6
49.1
60.9
71.3
88.2
5.8
8.0
#9
#12
#15
9.8
10.5
11.4
13.7
Align long rib with left
watering border.
#18
Blue
1
#24
Green
2
*Precipitation rates are for triangular spacing at 50% of diameter.
3
•
•
•
•
•
Nozzle Trajectory: 25°
Arc Range: 30° – 360°
Inlet Thread Size: 1" female NPT or 25mm female BSP
Nozzle Pop-Up Height: 4" (102mm)
Caution: Do not use pipe
dope on plastic threads –
severe damage will result.
4
3
5
Overall Height (Nozzle Retracted): 8.75" (222mm)
If sprinkler nozzle change is required,
refer to the nozzle specifications above
to select appropriate nozzle and install as follows:
Nozzle Installation
Clockwise travel reversing point is adjustable to provide
° thru 360°of arc. Counterclockwise travel reversing point
is non-adjustable (fixed) and is established when the long sprinkler body rib is aligned with the
left watering border. As nozzle begins clockwise travel from left border, adjust arc as follows:
Arc Adjustment
30
Insert tool blade
through top of
nozzle turret as
shown. Twist 1/4
turn to engage.
Lift riser assembly.
Grasp riser firmly
below nozzle turret
to prevent
Thread nozzles
into turret using
socket end of tool.
Align lower nozzle
as shown.
Insert tool blade through center of nozzle turret to
engage slot. Turn blade clockwise to decrease arc or
counterclockwise to increase arc. Each“click” is
Increase
retraction.
Decrease
T FI L IFT
equal to 3° of arc change. Observe new arc path as
nozzle sweeps back and forth. Repeat procedure as
necessary to fine-tune.
T FI L IFT
IF
L
T
Note: To expedite arc adjustment process, turn nozzle
turret by hand in current direction of travel, releasing
turret before reversing point.
IFLIFT
T
©
2000 The Toro Company, Irrigation Division
FORM NO. 368-0006 Rev. H
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Download File |
|
Document Type | Catalog |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)