2002 Poulan 1950 2025 2050 2075 2150 2155 2175 2350 2375 2150PR Chainsaw Owners Manual

harmful  emissions.  Always  clean  after 15
tanks of fuel or 5 hours of operation,  which-
ever comes first.   Clean more frequently  in
dusty conditions.  A used aire filter can never
be completely cleaned.  It is advisable to re-
place your air filter with a newone after every
5.   Replace any broken  or cracked muffler
parts.
6.   Reinstall  diffuser   and   spark   arresting
screen assembly with round  holes facing
up.
7.   Reinstall  muffler  cover and  2  screws.
Tighten securely.
50
hours of operation, or annually, whichever
comes first.
CARBURETOR ADJUSTMENTS
1.
2.
3.
4.
Loosen 3 screws on cylinder cover.
Remove cylinder cover.
Your  carburetor   is  equipped   with  limiter
caps.
Carburetor  adjustment  is a  compli-
Remove air filter.
cated task.   We recommend  that  you take
your  unit to  an  authorized  service  dealer.
Damage will occur if you turn the needles be-
yond the limiter stops.
Clean the air filter using hot soapy water.
Rinse with clean cool water. Air drycom-
pletely before reinstalling.
5.
Lightly oil air filter before installing  to im-
BAR MAINTENANCE
prove  the  efficiency  of  air  filter.
Use
If your saw cuts to one side, has to be forced
through the cut, or been run with an improper
amount of  bar lubrication  it may be  neces-
sary to service your bar. A wornbar will dam-
age your chain and make cutting  difficult.
After each use,  ensure ON/STOP switch is
in the STOP position, then clean all sawdust
from the guide bar and sprocket  hole.
To maintain guide bar:
2--cycle
engine oil or motor oil (SAE 30).
Squeeze excess oil from filter.
Reinstall air filter.
6.
7.
Reinstall  cylinder cover  and 3  screws.
TIghten securely.
Cylinder Cover
Air Filter
Screws
S  Move ON/STOP switch to the STOP posi-
tion.
Cylinder
Cover
Loosen and remove chain brake nuts and
S
chain brake.  Remove bar and chain from
saw.
S  Clean the  oil holes  and bar groove  after
each 5 hours of operation.
Remove Sawdust From
Guide Bar Groove
INSPECT  MUFFLER  AND   SPARK
ARRESTING SCREEN
As the unit is used, carbon deposits build up
on the  muffler and  spark arresting  screen,
and must be removed to avoid creating a fire
hazard or affecting engine  performance.
Replace the spark arresting screen if breaks
occur.
Oil Holes
S  Burring  of  guide  bar  rails  is   a  normal
process of rail wear. Remove these burrs
with a flat file.
Muffler Diffuser
Spark
S  When rail top is uneven, use a flat file to re-
store square edges and sides.
Arresting
Screen
Muffler
Cover
File Rail Edges
and Sides
Square
Screws
Worn Groove
Correct Groove
Replace guide bar when the groove is worn,
the guide  bar is  bent or  cracked,  or when
excess heating or burring of the rails occurs.
If  replacement  is necessary,  use only  the
guide bar specified for your saw in the repair
parts list or on the decal located on the chain
saw.
Muffler
Body
Muffler
Cover
CLEANING  THE  SPARK ARREST-
ING SCREEN
Cleaning is  required every  25 hours of op-
eration or annually, whichever comes  first.
CHAIN SHARPENING
1.
2.
3.
Loosen and remove  the 2 muffler cover
screws.
Chain sharpening is a complicated task that
requires  special  tools.  We  recommended
you refer chain sharpening to a professional
chain sharpener.
Remove the muffler cover (cover snaps
off muffler body).
Remove  muffler diffuser  and spark  ar-
resting   screen  assembly.   Notice  the
orientation  of these  parts for  reassem-
bling.
IGNITION TIMING
Ignition timing is  fixed and nonadjustable.
SPARK PLUG
4.
Clean the spark arresting  screen with a
wire brush. Replace screen if breaks are
found.
The  spark  plug  should be  replaced  each
year to ensure the  engine starts easier and
runs better.
14
Product Specification
CategoriesChainsaw Manuals, Poulan Chainsaw Manuals
Tags, , , , , , , , ,
Model Year2002
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 17 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandPoulan. Poulan US phone support. Wheeled (Mowers, Tractors, Tillers): 1-800-849-1297 Handheld (Chainsaws, Trimmers): 1-800-554-6723 , Chainsaw
Document File TypePDF
Publisherpoulan.com
Wikipedia's PagePoulan
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website