10
Adjusting the Cable
Inspecting the Rotor
Blades
1.
Unhook the end of
the control cable from
the control bar.
Before each season, inspect the rotor blades for
wear. When a rotor blade edge has worn down to the
wear indicator hole (A), have an Authorized Service
Dealer replace the rotor blades and the scraper.
m-6201
2.
Move the Z-fitting (A) to a higher or lower hole as
needed to obtain the 1/16 to 1/8 in. (2 to 3 mm) gap
between the control bar and the handle.
A
A
m-6202
m-6200a
Note: Moving the Z-fitting higher decreases the gap
between the control bar and the handle; moving it
lower increases the gap.
3.
Replace the spring cover and hook the end of the
control cable into the bottom hole of the control bar.
4.
Check the adjustment (refer to Checking the
Cable on page 9).
Note: After extended use, the drive belt may wear
and lose its proper belt tension. If the drive belt slips
(continuously squeals) under a heavy load, increase
the belt tension by inserting the spring end into the
top hole of the control bar. The belt may slip (squeal)
in wet conditions; to dry out the drive system, start
the rotor and run it without a load for 30 seconds.
3329-459
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38536, Toro CCR 2450 |
| Model Number | 38536 |
| Model Year | 2004 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 240000001 - 240999999 |
| Product Name | Toro CCR 2450 GTS Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | CCR 1000/2400/2500, Single Stage, Snowthrower |
| Swath | 20 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Toro |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Model # | R-tek |
| Engine Motor Size | 5 hp |
| Engine Motor Type | 2 Cycle EPA2 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3)
Lawn and Garden readers have rated Toro CCR 2450 GTS 38536 Snow Blower Operators Manual, 2004 3.0 out of 3.0 based on 1 product reviews. Website good