17
Storage
Replacing the Headlight
Bulb
Use a GE 892 16W halogen light bulb. Do not
touch the bulb with your hands or allow dirt or
moisture to come into contact with the bulb.
GasolineS vapors can explode.
1.
Remove the
S
S
DoDo notnot storestore gasolinethe snowmorethrowthaner in 30an days.enclosure
wire connector
from the back of
the headlight.
near an open flame.
Allow the engine to cool before storing it.
Preparing the Snowthrower
for Storage
m-7017
2.
Turn the base
of the bulb
counterclockwise
until it stops.
1. On the last refueling of the year, add fuel
stabilizer to fresh fuel as directed by the engine
manufacturer.
2.
conditioned fuel through the fuel system.
Run the engine for 10 minutes to distribute the
m-7012
3.
Remove the
3. Loosen the hose clamp that secures the fuel line
to the valve and slide the fuel line off the fuel shutoff
valve.
bulb straight out
from the back of
the headlight.
4.
Open the fuel shutoff valve and allow the fuel to
drain out of the fuel tank into an approved fuel
container.
5.
secure it with a hose clamp.
Install the fuel line onto the fuel shutoff valve and
m-7013
4.
bulb into the back
of the headlight.
Insert a new
6.
running out of fuel.
Run the snowthrower until the engine stops from
7.
8.
Prime the engine and start it again.
Allow the engine to run until it stops. When you
can no longer start the engine, it is sufficiently dry.
Stop the engine and allow it to cool.
10. Remove the ignition key.
Disconnect the spark plug wire.
9.
m-7014
5.
Turn the base
of the bulb
clockwise until it is
snug.
11.
12. Remove the spark plug, add 1 oz. (30 ml) of oil
through the spark plug hole, and pull the starter rope
slowly several times to distribute oil throughout the
cylinder to prevent cylinder corrosion during the
off-season.
m-7015
6.
Insert the wire
13.
Loosely install the spark plug.
connector straight
into the back of the
headlight until it is
securely in place.
14. Dispose of any unused fuel properly. Recycle it
according to local codes, or use it in your automobile.
Note: Do not store stabilized fuel for more than
90
days.
15.
16.
Clean the snowthrower thoroughly.
m-7017
Tighten all loose screws, bolts, and locknuts.
Repair or replace any damaged parts.
3329-808
Rev A
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38645, Toro Power Max 1028LE |
| Model Number | 38645 |
| Model Year | 2004 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 240000001 - 240999999 |
| Product Name | Toro Power Max 1028 LE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Power Max |
| Swath | 28 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 26 oz. (.8l) 5w-30 or 10w / API SH or higher |
| Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
| Engine Motor Model # | HMSK100-159495Y |
| Engine Motor Size | 10 hp |
| Engine Motor Type | 4 Cycle CARB2, EPA2 |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3)
Lawn and Garden readers have rated Toro Power Max 1028LE 38645 Snow Blower Operators Manual, 2004 3.0 out of 3.0 based on 1 product reviews. having troubles with the engine becoming starved for gas before the gas tank is dry. this can happen even when the tank is 75% full.