Toro Power Max 828LE 38632 Snow Blower Operators Manual, 2004

3
Never operate the snowthrower without good
visibility or light. Always be sure of your footing,
and keep a firm hold on the handle. Walk; never
run.
all moving parts to stop.  Disconnect the wire
from the spark plug and keep it  away from the
spark plug to prevent someone from
accidentally starting the engine.
To unclog the discharge chute, stay in the
operating position and release the left hand
(traction) lever. While running the auger/impeller,
push down on the handles to raise the front of the
snowthrower a few inches (centimeters) off the
pavement. Then lift the handles quickly to bump
the front of the snowthrower on the pavement.
Repeat if necessary until a stream of snow comes
out the discharge chute.
Maintenance and Storage
Check all fasteners at frequent intervals for
proper tightness to be sure that the equipment is
in safe working condition.
Never store the machine with fuel in the fuel tank
inside a building where ignition sources are
present, such as hot water and space heaters
and clothes dryers. Allow the engine to cool
before storing in any enclosure.
If you cannot unclog the discharge chute by
bumping the front of the snowthrower, stop the
engine, wait for all moving  parts to stop, and
use a stick; never use your hand.
Always refer to this operator’s manual for
important details if the snowthrower is to be
stored for an extended period.
Do not wear loose-fitting clothing that could get
caught in moving parts.
Maintain or replace safety and instruction labels
when necessary.
If a shield, safety device, or decal is damaged,
illegible, or lost, repair or replace it before
beginning operation.
Toro Snowthrower Safety
Do not smoke while handling gasoline.
The following list contains safety information specific
to Toro products or other safety information that you
must know.
Do not touch the engine while it is running or
soon after it has stopped because the engine
may be hot enough to cause a burn.
Rotating rotor auger/impeller can cut  off or
injure fingers or hands. Stay behind the
handles and away from the discharge opening
while operating the snowthrower. Keep your
face, hands, feet, and any other part  of your
body or clothing away from  moving or
rotating parts.
When storing the snowthrower for more than
30
days, drain the fuel from the fuel tank to
prevent a potential hazard. Store fuel in an
approved fuel container. Remove the key from
the ignition switch before storing the
snowthrower.
Purchase only genuine Toro replacement parts
and accessories.
Before adjusting, cleaning, inspecting,
troubleshooting, or repairing the snowthrower,
stop the engine, remove the key,  and wait for
3329-773
Rev A
Product Specification
CategoriesSnow Blower Manuals, Toro Snow Blower
Tags,
Model Number38632
Model Year2004
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 24 pages
Document TypeOperator's Manual
LanguageEnglish
Serial Number240000001 - 240999999
Product NameToro Power Max 828 LE Snowthrower
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower
Product TypeSnowthrower
Product SeriesSnowthrower, Two Stage Power Max
Swath28 inch
DischargeTwo Stage
Engine ManufacturerTecumseh
Engine Oil Type26 oz. (.8l) 5w-30 or 10w / API SH or higher
Gearbox Lubricant4.5 oz. (133ml) SAE 90 GL5 or higher
Engine Motor Model #HMSK80-155672X
Engine Motor Size8 hp
Engine Motor Type4 Cycle CARB2, EPA2
Transmission Speed6 Forward/2 Reverse
Transmission TypeFriction Disc
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website