Poulan PR8527ES 403919 Snow Blower Owners Manual

OPERATION
TO THROW SNOW (See Fig. 13)
TO MOVE FORWARD AND BACKWARD (See Fig. 15)
The auger rotation is controlled by the auger control lever
located on the right side handle.
SELF-PROPELLING, forward  and reverse  movement of
the snow thrower, is controlled by the traction drive control
lever located on the left side handle.
Squeeze auger control lever to handle to engage  the
auger and throw snow.
Squeezetractiondrivecontrollevertohandletoengage
the drive system.
Release the auger control lever to stop throwing snow.
Release traction drive control lever to stop the forward
or reverse movement of the snow thrower.
AUGER
CONTROL
LEVER
SPEED and DIRECTION are controlled by the drive speed
control lever.
Press downward on the speed control lever and move
lever to desired position BEFORE engaging the  trac-
tion drive control lever. Be sure lever springs back and
locks into desired position.
CAUTION: Do  not  move speed  control  lever
when traction drive  control lever is  engaged.
Damage to the snow thrower can result.
FIG. 13
USING THE CLEAN-OUT TOOL (See Fig. 14)
Slower speeds are for heavier snow and faster speeds
are for light snow and transporting the snow thrower.It
is recommended that you use a slower speed until you
are familiar with the operation of the snow thrower.
In certain  snow conditions, the discharge  chute may be-
come clogged with ice and snow. Use the clean-out tool to
dislodge this blockage.
NOTE: When both traction drive and auger control levers
are engaged, the  traction drive control lever  will lock the
auger control lever in the engaged position.This will allow
you to release your right hand from the handle and adjust
the discharge chute direction without interrupting the snow
throwing process.
When cleaning, repairing, or inspecting, make
certain  all controls  are  disengaged  and  the
auger/impeller   and  all   moving  parts   have
stopped. Disconnect the spark  plug wire and
keep the wire away from the spark plug to pre-
vent accidental starting.
TRACTION DRIVE
CONTROL LEVER
Releasetheaugercontrolleverandshutofftheengine.
Removetheclean-outtoolfromit'smountingclip.    Grasp
the tool firmly by the handle and push and twist the tool
into the discharge chute to dislodge the blockage.
Afterthepackedsnowhasbeendislodged,returntheclean-
out tool to it's mounting clip by pushing it into the clip.
Makesurethedischargechuteispointedinasafedirec-
tion(novehicles,buildings,people,orotherobjectsare
inthedirectionofdischarge)beforerestartingtheengine.
Restart the  engine, then  squeeze the  auger control
lever to the handle to clear snow from the auger hous-
ing and the discharge chute.
DRIVE SPEED
CONTROL LEVER
DISCHARGE CHUTE
FIG. 15
CLEAN-OUT
TOOL
MOUNTING CLIP
FIG. 14
10
Product Specification
CategoriesPoulan Snow Blower Manuals, Snow Blower Manuals
Tags
Model Year2006
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 20 pages
LanguageEnglish
Product BrandPoulan. Poulan US phone support. Wheeled (Mowers, Tractors, Tillers): 1-800-849-1297 Handheld (Chainsaws, Trimmers): 1-800-554-6723 , Snow Blower
Document File TypePDF
Publisherpoulan.com
Wikipedia's PagePoulan
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website