Toro Power Max 522 38605 Snow Blower Operators Manual, 2007

4.
Loosen the flange nuts that secure the selector plate
to the control panel (Figure 29).
6.  With the drive assembly 1/8 inch (3 mm) from the
roll pin, tighten the flange nuts that secure the speed
selector plate.
7.
8.
9.
Shift the speed selector lever to the R (Reverse)
position and back to third gear  to check the
adjustment.
If the space between the roll pin and the drive
assembly is more than 3/16 inch (5 mm), repeat
steps 3 through 6.
Install the bottom cover and return the snowthrower
to the upright position.
Checking the Auger Gearbox
Grease
Service Interval: Yearly
The auger gearbox is packed with 5 oz.  (140 g) of
Lubriplate MAG-1 (a low-temperature, high-pressure
grease) and is sealed at the factory.  The pipe plug
(Figure 31) is for factory use only; you do not need to
check or add grease. If the gearbox is leaking grease,
contact an Authorized Service Dealer.
Figure 29
1.
Speed selector plate
2.   Flange nuts
5.
Shift the speed selector lever to third gear and push
down on the speed selector plate to move the drive
assembly to the right.
Note: The drive assembly should be 1/8 inch (3
mm) from the roll pin; if not, slide the selector plate
(Figure 29) until the gap is 1/8 inch (3 mm); refer
to Figure 30.
Figure 31
1.
Pipe plug
Changing the Engine Oil
Service Interval: After the first 2 hours
Yearly
Every 25 hours
If possible, run the engine just before changing the
oil because warm oil flows better and carries more
contaminants.
Figure 30
1.
Roll pin
3.   1/8 inch (3 mm)
Max. fill:  21 oz. (0.62 l), type: automotive detergent
oil with an API service classification of SF, SG, SH, SJ,
SL, or higher.
2.
Drive assembly
For temperatures above 32°F (0°C), use SAE 30.
19
Product Specification
CategoriesSnow Blower Manuals, Toro Snow Blower
Tags,
Model Number38605
Model Year2008
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 28 pages
Document TypeOperator's Manual
LanguageEnglish, Français
Serial Number270000001 - 270004504
Product NameToro 522 Power Throw Snowthrower
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower
Product TypeSnowthrower
Product SeriesSnowthrower, Two Stage Small Frame
Swath22 inch
DischargeTwo Stage
Engine ManufacturerTecumseh
Engine Oil Type21 oz. (.62l) 5w-30 or 10w / API SH or higher
Gearbox LubricantAuger 5 oz. Lubriplate Mag 1 grease
Engine Motor Model #LH195SA-67435V
Engine Motor Size22 hp
Engine Motor Type4 Cycle CARB2, EPA2
Transmission Speed3 Forward/1 Reverse
Transmission TypeFriction Disc
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website