MTD Cub Cadet 600 Series Snow Blower Owners Manual

Chute Assembly (all models)
1.
2.
3.
Apply a light lubricant (i.e. 3-in-1 oil) to the base of
the chute assembly.
Place the chute assembly on the lip of the chute
adapter. See Figure 3
One end of each chute keeper is already attached
to the chute flange. Pivot the free end of the chute
keeper to align it with the chute flange and push it
till it snaps into position. See Figure 4. Repeat with
remaining chute keepers.
Cables
Short
Tube
Chute Support
Tube
Figure 6
Chute
Assembly
2.
3.
Position the chute assembly so the chute opening
is facing the front of the unit.
Place the chute control box on the short tube of the
chute assembly and the chute support tube of the
chute assembly as shown in Figure 6, cables
should be towards the operator.
Insert the clevis pin, earlier removed, through the
holes on the chute control box and chute support
tube. Secure with the hairpin clip. See Figure 5.
2
1
4.
Figure 3
For Models with 2Way Chute Control
1.
Slip the cables, running from the chute to the
handle panel into the cable guide located on top of
the engine. See Figure 7 .
Cable Guide
Chute
Assembly
3
Chute Keeper
Figure 4
For Models with 4 Way Chute Control Box
Figure 7
Models with a Chute Directional Control
1.
Pull the hairpin clip out of the clevis pin on the chute
support tube. Save this hardware.
1.
Remove the flat washer and hairpin clip from the
end of the chute directional control. Insert the end
of the chute directional control into the lower
bracket and secure with the flat washer and hairpin
clip just removed. See Figure 8.
4
Way
Hairpin Clip
Chute
Control
Box
Clevis
Pin
NOTE:   If   necessary,   the  lower   bracket   can  be
adjusted.   Refer   to   Chute   Bracket  Adjustment.   in   the
Adjustment Section.
Chute Support
Tube
Figure 5
6
Product Specification
CategoriesCub Cadet Snow Blower Manuals, MTD Snow Blower Manuals, Snow Blower Manuals
Tags, ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 52 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandMTD, Snow Blower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website