English / USA
Storing the Machine
Replacing the Depth Wheel
Replacing the Skirt
For periods of about 3 months or longer
1
:
Drain and clean the fuel tank in a
well ventilated area.
3
2
:
Dispose of remaining fuel and
cleaning solution properly in
accordance with local
4
1
2
environmental requirements.
:
Run engine until carburetor is dry –
this helps prevent the carburetor
diaphragms sticking together.
Have worn depth wheel replaced by
your STIHL dealer.
Removing the skirt
:
:
Remove, clean and inspect the
cutting blade.
:
Release and remove screw (1)
along with washer (2).
:
The end of the thread on screw (1)
is caulked to ensure that the
wingnut (2) does not work loose
and be lost.
Thoroughly clean the machine – pay
special attention to the cylinder fins
and air filter.
:
Pull the skirt (3) off the lug (4) and
out of the deflector
:
Store the machine in a dry, high or
locked location – out of the reach of
children and other unauthorized
persons.
A very high torque has to be applied to
remove the wingnut from the screw. If
the parts are then reassembled, the
captive function is no longer
guaranteed. In such a case the screw
and wingnut should be replaced by your
dealer*.
5
3
Position of skirt
:
Position the skirt (3) correctly in
relation to depth wheel (5):
If wheel is on left, the skirt must
project to the right.
*
STIHL recommends that this work
be done by a STIHL servicing dealer
FC 100
31
| Categories | STIHL Straight Edger Manuals, Straight Edger Manuals |
|---|---|
| Tags | STIHL FC 100 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Edger |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)