Installation Procedure
The S700, S700C and S700 HP sprinklers are designed for installation in-ground, aligned perpendicular to
the coverage area with the top of the cap level with compacted finish grade. When operated, the sprinkler
riser will extend, positioning the rotating nozzle above the turf or ground cover. When turned off, the nozzle
and riser will retract, by spring pressure, into the sprinkler body assembly.
The S700S shrub sprinkler is designed for installation above ground on a riser, constructed from 3/4"
(20mm)
schedule 40 or 80 PVC or galvanized steel pipe, positioned perpendicular to the coverage area.
Installation of a flexible connection between the sprinkler or shrub riser and the lateral line is recommended.
Unlike a rigid connection, the flexible link enables easy, accurate positioning of the sprinkler and helps protect
the PVC piping and fittings from breakage due to downward or lateral sprinkler movement. See Figure 1 for
typical installation methods.
Figure 1 - Installation Methods
S700S
3/4"
(20 mm) SCH 40
PVC, SCH 80 PVC OR
GALVANIZED PIPE
S700 HP
S700 & S700C
3/4"
THREADED
COUPLING
3/4"
TEE
SxSxT
FUNNY
PIPE
FUNNY PIPE
SxSxT
FUNNY
PIPE
3/4"
TEE
3/4"
TEE
SxSxT
3
/4 "MALE
ELBOW
850-32)
3/4" MALE
ELBOW
(850-32)
(
3/4"
MALE
ELBOW
(850-32)
Referring to Figure 1, install the sprinklers as follows:
1.
2.
3.
Complete all pipe connections from lateral lines.
Thoroughly flush all dirt and debris from system.
Thread sprinkler onto 3/4 in. male NPT fitting and tighten by hand until snug – do not overtighten.
CAUTION: Use only TeflonTM tape on plastic threaded connections. Use of pipe dope or other pipe
sealing compounds may damage plastic components.
4.
5.
6.
Backfill soil around sprinkler or shrub riser. Thoroughly compact soil around components to maintain
correct installation position.
If sprinkler nozzle is not installed, remove protective cover and install nozzle at this time. See “Nozzle
Installation and Removal” instructions on page 3.
Activate sprinklers and observe operation. If necessary, adjust part circle arc and/or spray radius as
explained in following sections: “Part Circle Arc Adjustment” (pages 3 - 5) ,“Spray Radius Adjustment”
(page 6).
2
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Super 700 |
| Download File |
|
| Document Type | Installation Instructions |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)