Husqvarna 288XP Lite Chainsaw Owners Manual

MAINTENANCE
Below you will find some general maintenance instructions.
If you have more questions, contact your servicing dealer.
Weekly maintenance
1.
Check that the AV
elements are not soft or
torn.
1
3
Daily maintenance
2.
3.
Lubricate the clutch drum
bearing.
2
4
1.
2.
Check that all the
components of the throttle
control operate safely (i.e.
throttle lock, throttle lever
and start throttle lock).
1
File off burrs, if any, on
the sides of the bar.
Clean the chain brake
and check its function
according to the
4.
5.
Clean the spark plug and
check the gap.
The correct gap is 0,5 mm
2
0,5
mm
instructions. Make sure
that the chain catcher is
undamaged. Otherwise
replace it immediately.
(0,020
inch).
Check the starter and the
recoil spring. Clean the
fins on the flywheel.
5
7
3.
4.
Clean or replace the air
filter as necessary. Check
for damage or holes.
3
6
8
The bar should be turned
daily for more even wear.
Check the lubrication hole
in the bar, to be sure it is
not clogged. Clean the
bar groove, if the bar has
a sprocket tip, this should
be lubricated.
6.
7.
Clean the cooling fins on
the cylinder.
Clean or change the
screen in the muffler.
4
5
8.
Clean the carburetor body
and air box.
5.
Check the function of the
oiler to be sure the bar
and chain receive proper
lubrication.
6
6.
7.
Sharpen the chain and
check its tension and
condition. Check the drive
sprocket for wear.
Monthly maintenance
Replace if necessary.
1.
Check the brake band on
the chain brake for wear.
Check the starter and
starter cord for wear or
damage. Clean the air
intake slots on the starter
housing.
1
7
2.
Check the clutch centre,
clutch drum and clutch
spring for wear.
2
8
8.
9.
Check for any loose nuts
and screws and retighten
if necessary.
3.
Clean the outside of the
carburetor.
3
9
Test the stop switch to be
sure it shuts off the
engine.
4
4.
5.
Change the fuel filter.
5
Flush the inside off the
fuel tank with gasoline.
6
6.
7.
Flush the inside of the oil
tank with gasoline.
7
9
Check all cables and
connections.
8
0,5 mm
8.
9.
Change the spark plug.
Change the air filter.
English –
33
Product Specification
CategoriesChainsaw Manuals, Husqvarna Chainsaw Manuals
Tags
Model Year1995, 1996, 1997, 1998
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 36 pages
Document TypeOperator's Manual
LanguageEnglish
Product BrandHusqvarna, Chainsaw
Document File TypePDF
Publisherhusqvarna.com
Wikipedia's PageHusqvarna
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website