Maintenance
5.
6.
Reassemble idler spring, making sure idler
pulley is riding on belt.
8.
9.
When tightening bolt, bolt head and washers
must be flush against small pulley. Torque bolt
to 25-30 in-lbs. DO NOT OVERTIGHTEN
BOLT.
Reinstall left side cover and skid with (3)
screws.
Slip large belt over small pulley (Fig. 20). Refer
to Large Belt Replacement, steps 4-6.
Small Belt Replacement
1.
2.
3.
4.
Remove (3) screws securing left side plate and
skid to snowthrower frame (Fig. 14). Remove
side plate and skid.
Remove large belt by slowly walking (sliding) it
off small pulley (Fig. 18). Refer to steps 2-3 in
Large Belt Replacement section.
Remove small pulley bolt (left hand thread) by
turning bolt clockwise, remove (2) washers, and
small pulley (Fig. 21).
Remove and discard small belt (Fig. 21).
5
4
3
2
1
1530
Figure 21
1.
2.
3.
Bolt (left hand thread)
Washers
4.
5.
Small belt
Motor shaft pulley
Small pulley
5.
Slide (2) washers onto bolt. Insert bolt through
small pulley. Bolt must ride on bearings in small
pulley.
6.
7.
Place new belt on small pulley.
Slide belt over motor shaft pulley (Fig. 21).
EN-15
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 1800 Power Curve, Toro 38025 |
| Model Number | 38025 |
| Model Year | 1996 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 69000001 - 69999999 |
| Product Name | 1800 Power Curve Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower |
| Swath | 18 inch |
| Discharge | Single Stage |
| Engine Motor Size | 12 amp |
| Engine Motor Type | 120-VAC |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)