Read operator’s
manual
Electrical
shock/electrocution
Consult technical
manual for proper
service procedures
Disconnect power
Do not open or
remove safety shields
while engine is
running
Severing of fingers or
hand—impeller blade
Wear eye protection
Assembly
Note: Refer to Figures section at the back of the manual.
POTENTIAL HAZARD
Motor impeller rotates for a few seconds after blower
is turned off.
Note: Always turn off unit and unplug from electrical outlet
before adding or switching attachments.
•
WHAT CAN HAPPEN
Rotating impeller can cut or injure fingers.
HOW TO AVOID THE HAZARD
•
Blower
1.
Slide tube onto blower outlet until tabs on tube snap into latch
(Fig. 2).
• Never remove inlet cover when motor is operating or
when unit is plugged in.
Note: Blower tube must be attached to housing when operating in
the blower mode.
2.
3.
Hold vacuum tube vertically and place blower inlet over top of
tube (Fig. 6). Tubes will only fit one way in blower inlet.
Note: Inlet cover must be securely locked into position,
activating interlock switch, before blower will operate. Pointer
on cover will be aligned with pointer on housing when cover is
correctly locked in position (Fig. 3 & 4).
Rotate unit clockwise until pointer on vacuum tube aligns with
pointer on housing (Fig. 7, 8 & 9).
Note: Vacuum tube and housing pointers must be aligned at locked
position before blower will operate.
Note: Blower is shipped with inlet cover installed.
4.
Slidethe Velcrobag collart strapinto(Fig.bag10).openingLine upuntilbagbagseamcollarwithflangetab on is past
Vacuum
collar. Tighten Velcro strap to secure bag to collar (Fig. 10).
Close bag zipper. Bag should appear as shown in Figure 11
when correctly assembled.
(Model 51541 Vacuum Kit not included)
1.
Grasp inlet cover and rotate it counterclockwise to remove
(Fig. 5).
5.
Slide bag collar onto blower outlet until tabs on bag collar snap
into latch (Fig. 12).
2
| Categories | Blower Vacuum and Sweeper Manuals, Toro Blower and Vacuum Manuals |
|---|---|
| Tags | Toro 51551 |
| Model Number | 51551 |
| Model Year | 1998 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 89000001 - 89999999 |
| Product Name | Air Rake, Australia |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Blowers, Vacuums |
| Product Type | Blower, Vacuum |
| Product Series | Air Rake / Rake and Vac, Blower |
| Discharge | 260 km/h |
| Engine Motor Size | 5.5 amp |
| Engine Motor Type | 230 VAC |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)