Husqvarna 394XP Chainsaw Owners Manual

SAFETY INSTRUCTIONS
C   Checking chain lubrication
E
Lubricating the clutch drum bearing
Check the chain lubrication
each time you refuel.
Aim the tip of the saw at a
light coloured surface about
•  Between the engine drive
shaft and the clutch drum is
a needle bearing that must
be lubricated daily. Use the
specially designed grease
gun and a good quality
bearing grease.
20
cm away. After 1 minute
running at 3/4 throttle you
should see a distinct line of
oil on the light surface.
F
Checking wear on cutting equipment
Saw chain
If the chain lubrication is not working:
1
Check that the oil channel
in the bar is not
obstructed. Clean if
necessary.
Check the saw chain daily for:
Visible cracks in rivets and
links.
Whether the chain is stiff.
Whether rivets and links are
badly worn.
2
3
Check that the groove in
the edge of the bar is
clean. Clean if necessary.
We recommend you
min 4 mm
(0,16")
compare the existing chain
with a new chain to decide
how badly it is worn.
Check that the bar tip
sprocket turns freely and
that the lubricating hole in
the tip is not blocked.
Clean and lubricate if
necessary.
When the length of the
cutting teeth has worn down
to only 4 mm the chain must
be replaced.
G   Chain drive sprocket
If the chain lubrication
system is still not working
after carrying out the
above measures you
should contact your
service agent.
The clutch drum is fitted with one of the following drive
sprockets:
A
SPUR (integral drive
sprocket)
D   Lubricating the bar tip sprocket
B
RING (replaceable)
A
B
Lubricate the bar tip
sprocket each time you
refuel. Use the special
grease gun and a good
quality bearing grease.
Regularly check the
degree of wear on the
drive sprocket. Replace if
wear is excessive.
Replace the drive
sprocket whenever you
replace the chain.
English –
15
Product Specification
CategoriesChainsaw Manuals, Husqvarna Chainsaw Manuals
Tags
Model Year1999, 2000, 2001
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 36 pages
Document TypeOperator's Manual
LanguageEnglish
Product BrandHusqvarna, Chainsaw
Document File TypePDF
Publisherhusqvarna.com
Wikipedia's PageHusqvarna
CopyrightAttribution Non-commercial
(1 votes, average: 5 out of 5)
Lawn and Garden readers have rated Husqvarna 394XP Chainsaw Owners Manual 5.0 out of 5.0 based on 1 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

Husqvarna 394XP Chainsaw Owners Manual SKU UPC Model
Robert Brooks on Jun 26, 2014.

The chain saw is a excellence piece of equipment.


Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website