Poulan 3450 3750 Chainsaw Owners Manual

marked  container  for  all  fuel  purposes.
Wipe up all fuel spills  before starting saw.
S  Move at least 10 feet (3 meters) from fuel-
ing site before starting  engine.
Avoid Obstructions
S  Turn the engine off  and let saw  cool in a
non-combustible  area, not on dry leaves,
straw, paper, etc. Slowly remove  fuel cap
and refuel unit.
S  Store the unit and fuel in an area where fuel
vapors  cannot   reach   sparks  or   open
flames from water heaters, electric motors
or switches, furnaces, etc.
Clear The Working Area
REDUCE THE CHANCE OF
KICKBACK
KICKBACK
S  Recognize  that   kickback  can   happen.
With a  basic understanding  of  kickback,
you can  reduce  the element  of  surprise
which contributes to accidents.
WARNING:
Kickback   can  occur
when the moving chain contacts an object at
the upper portion of the tip of the guide bar or
when the  wood closes  in and  pinches  the
saw chain  in the cut.  Contact at  the upper
portion of the tip of the guide  bar can cause
the chain to dig into  the object, which stops
the chain for an instant. The result is a light-
ning fast,  reverse reaction  which kicks  the
guide bar up and back toward the operator. If
the saw chain is pinched along the top of the
guide bar, the guide bar can be driven rapidly
back  toward the  operator.  Either  of these
reactions  can  cause  loss  of  saw  control
S  Never let the moving chain contact any ob-
ject at the tip of the guide  bar.
S  Keep the working area free from obstruc-
tions such as other trees, branches, rocks,
fences,  stumps,  etc.  Eliminate  or  avoid
any obstruction that your saw chain could
hit while you are cutting through a particu-
lar log or branch.
S  Keep your saw chain  sharp and properly
tensioned.  A loose  or dull  chain  can in-
crease the chance of kickback  occurring.
Follow  manufacturer’s  chain  sharpening
and maintenance instructions.  Check ten-
sion  at regular  intervals  with the  engine
stopped, never with engine running. Make
sure the bar clamp nuts are securely tight-
ened after tensioning  the chain.
which  can result  in serious  injury.
Guard
against kickback
Rotational  Kickback  is the  rapid  upward
and backward motion  of the chain saw that
can occur when the moving saw chain near
the upper portion  of the tip of  the guide bar
contacts an object such as a log or a branch.
Pinch-Kickback  and  Pull-In  occur  when
the  chain  is  suddenly   stopped  by  being
pinched, caught,  or by contacting  a foreign
object in the wood. This sudden  stopping of
the chain  results in  a reversal of  the chain
force used to cut wood and causes the saw
to move in the opposite direction of the chain
rotation.   Pinch-Kickback   drives  the   saw
straight  back  toward  the  operator.  Pull-In
pulls the saw away from the operator. Either
reaction can result in loss of control and seri-
ous injury.
S  Begin and continue cutting at full speed. If
chain is moving at a slower speed, there is
greater chance of kickback  occurring.
S  Cut one log at a time.
S  Use extreme caution  when re-entering  a
previous cut.
S  Do not attempt cuts starting with the tip of
the bar (plunge cuts).
S  Watch for shifting logs or other forces that
could close a cut and pinch or fall into chain.
S  UseReduced-KickbackGuideBarandLow-
Kickback Chain specified for your saw.
MAINTAIN CONTROL
Avoid Pinch--Kickback:
Stand to the left of
the saw
S  Be extremely  aware of  situations  or ob-
structions that can cause material to pinch
the top of or otherwise stop the  chain.
S  Do not cut more than one log at a time.
S  Do not twist  the  saw as the  bar is  with-
drawn from an undercut when bucking.
Never reverse
hand positions
Avoid Pull--In:
S  Always begin  cutting  with  engine  at full
speed and saw housing against  wood.
S  Usewedges made of plastic or wood. Nev-
er use metal to hold the cut open.
Kickback Path
3
Product Specification
CategoriesChainsaw Manuals, Poulan Chainsaw Manuals
Tags,
Model Year2000
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 16 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandPoulan. Poulan US phone support. Wheeled (Mowers, Tractors, Tillers): 1-800-849-1297 Handheld (Chainsaws, Trimmers): 1-800-554-6723 , Chainsaw
Document File TypePDF
Publisherpoulan.com
Wikipedia's PagePoulan
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website