•
•
After clearing the snow, let the motor run for a few
minutes so the ice doesn’t freeze any moving parts.
Shut off the motor, wait for all moving parts to stop,
and wipe the ice and snow off the snowthrower. Rotate
the chute crank several times to remove the snow from
the snowthrower.
2
2
Lock the snowthrower when you are not using the
snowthrower. Disconnect the extension cord. Hold the
key down, turn it clockwise and remove it from the
handle to prevent an unauthorized person from using
the snowthrower.
1
1517
Maintenance
Figure 12
1.
Scraper
2.
Screw
Note: Determine the left and right sides of the
snowthrower by standing in the normal operating position.
1.
2.
Remove the two screws that secure the scraper to the
snowthrower (Fig. 12).
Install the new scraper and fasten it securely with two
screws.
POTENTIAL HAZARD
•
If the extension cord is plugged into the
snowthrower and the key is in the handle,
someone could accidentally operate
snowthrower while you are performing
maintenance on it.
Replacing the Rotor
1. Remove the three screws that secure the right side
cover and the skid to the snowthrower frame (Fig. 13).
WHAT CAN HAPPEN
•
Operating the snowthrower while performing
maintenance on it can cause serious personal
injury.
HOW TO AVOID THE HAZARD
•
Disconnect the extension cord before you
perform any maintenance. Hold the key down,
turn it clockwise and remove it from the
handle.
2
1
3
1537
Figure 13
Lubricating the Snowthrower
1.
2.
Right side cover
Screw
3.
Skid
You do not need to lubricate the snowthrower; all the
bearings were lubricated at the factory for the life of the
snowthrower.
2.
Using a 3/8-in. Allen wrench, turn the rotor shaft
clockwise (left hand thread) while holding the rotor
(Fig. 14).
Replacing the Scraper
Note: You may need to tap the Allen wrench with a
hammer to loosen the rotor shaft. Wedge a stick or a
hammer handle in the rotor to prevent rotation.
The scraper is located at the bottom of the rotor housing
as shown in Figure 12.
10
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 1800 Power Curve, Toro 38025 |
| Model Number | 38025 |
| Model Year | 2000 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 200000001 - 200999999 |
| Product Name | 1800 Power Curve Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower |
| Swath | 18 inch |
| Discharge | Single Stage |
| Engine Motor Size | 12 amp |
| Engine Motor Type | 120-VAC |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)