SAFETY INSTRUCTIONS
In most cases you can avoid these problems by cutting in two
Start by cutting from below (about 1/3 of the way through).
stages;from the top and from the bottom.You need to support
the object so that it will not trap the chain or split during
cutting.
WARNING! If the chain jams in the cut: stop
the engine! Don’t try to pull the chain saw
free. If you do you may be injured by the
chain when the chain saw suddenly breaks
free. Use a lever to open up the cut and free
the chain saw.
!
Finish by cutting from above so that the two cuts meet.
The following instructions describe how to handle the
commonest situations you are likely to encounter when using
a chain saw.
The log is supported at both ends. There is a high risk that
the chain will jam.
Cutting
The log is lying on the ground. There is little risk of the
chain jamming or the object splitting. However there is a risk
that the chain will touch the ground when you finish the cut.
Start by cutting from above (about 1/3 of the way through).
Cut all the way through the log from above. Avoid letting the
chain touch the ground as you finish the cut. Maintain full
throttle but be prepared for what might happen.
Finish by cutting from below so that the two cuts meet.
Limbing
When limbing thick branches you should use the same
approach as for cutting.
If it is possible (can you turn the log?) stop cutting about 2/3
of the way through the log.
Cut difficult branches piece by piece.
2
1
3
Turn the log and finish the cut from the opposite side.
The log is supported at one end. There is a high risk that it
will split.
English – 19
| Categories | Chainsaw Manuals, Husqvarna Chainsaw Manuals |
|---|---|
| Tags | Husqvarna 3120XP |
| Model Year | 2001, 2002, 2003, 2004 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Husqvarna, Chainsaw |
| Document File Type | |
| Publisher | husqvarna.com |
| Wikipedia's Page | Husqvarna |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)