SAFETY INSTRUCTIONS
C Checking chain lubrication
E
Checking wear on cutting equipment
Saw chain
•
Check the chain lubrication
each time you refuel.
Aim the tip of the saw at a
light coloured surface about
Check the saw chain daily for:
20
cm away. After 1 minute
•
Visible cracks in rivets and
links.
running at 3/4 throttle you
should see a distinct line of
oil on the light surface.
•
•
Whether the chain is stiff.
Whether rivets and links are
badly worn.
We recommend you
compare the existing chain
with a new chain to decide
how badly it is worn.
min 4 mm
(0,16")
When the length of the
cutting teeth has worn down
to only 4 mm the chain must
be replaced.
If the chain lubrication is not working:
1
Check that the oil channel
in the bar is not
obstructed. Clean if
necessary.
F
Chain drive sprocket
Regularly check the degree
of wear on the drive
sprocket. Replace if wear is
excessive.
2
3
Check that the groove in
the edge of the bar is
clean. Clean if necessary.
Check that the bar tip
sprocket turns freely and
that the lubricating hole in
the tip is not blocked.
Clean and lubricate if
necessary.
If the chain lubrication
system is still not working
after carrying out the
above measures you
should contact your
service agent.
D Lubricating the bar tip sprocket
•
Lubricate the bar tip
sprocket each time you
refuel. Use the special
grease gun and a good
quality bearing grease.
English –
15
Categories | Chainsaw Manuals, Husqvarna Chainsaw Manuals |
---|---|
Tags | Husqvarna 335XPT |
Model Year | 2001, 2002, 2003, 2004, 2005 |
Download File |
|
Document Type | Operator's Manual |
Language | English |
Product Brand | Husqvarna, Chainsaw |
Document File Type | |
Publisher | husqvarna.com |
Wikipedia's Page | Husqvarna |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)