2001-2009 Husqvarna 570 576XP Chainsaw Owners Manual

GENERAL SAFETY PRECAUTIONS
recommended file gauge. A damaged or badly
Some terms that describe the bar and chain
sharpened chain increases the risk of accidents.
To maintain the safety features of the cutting equipment,
you should replace a worn or damaged bar or chain with
a bar and chain combinations recommended by
Husqvarna. See instructions under the heading Technical
Data for a list of replacement bar and chain combinations
we recommend.
Maintain the correct depth gauge setting! Follow
our instructions and use the recommended depth
gauge clearance. Too large a clearance increases
the risk of kickback.
Bar
Length (inches/cm)
Number of teeth on bar tip sprocket (T).
Keep the chain properly tensioned! If the chain is
slack it is more likely to jump off and lead to increased
wear on the bar, chain and drive sprocket.
Chain pitch (inches). The spacing between the drive
links of the chain must match the spacing of the teeth
on the bar tip sprocket and drive sprocket.
Keep cutting equipment well lubricated and
properly maintained!  A poorly lubricated chain is
more likely to break and lead to increased wear on the
bar, chain and drive sprocket.
Number of drive links. The number of drive links is
determined by the length of the bar, the chain pitch
and the number of teeth on the bar tip sprocket.
Cutting equipment designed to reduce
kickback
Bar groove width (inches/mm). The groove in the bar
must match the width of the chain drive links.
WARNING! Faulty cutting equipment or
the wrong combination of bar and saw
!
chain increases the risk of kickback!
Only use the bar/saw chain combinations
we recommend, and follow the filing
instructions. See instructions under the
heading Technical data.
The only way to avoid kickback is to make sure that the
kickback zone of the bar never touches anything.
Chain oil hole and hole for chain tensioner. The bar
must be matched to the chain saw design.
By using cutting equipment with ”built-in” kickback
reduction and keeping the chain sharp and well-
maintained you can reduce the effects of kickback.
Bar
Chain
The smaller the tip radius the lower the chance of kickback.
Chain pitch (inches)
Chain
A chain is made up of a number of links, which are
available in standard and low-kickback versions.
IMPORTANT! No saw chain design eliminates the
danger of kickback.
Drive link width (mm/inches)
WARNING! Any contact with a rotating
saw chain can cause extremely serious
injuries.
!
English 11
Product Specification
CategoriesChainsaw Manuals, Husqvarna Chainsaw Manuals
Tags,
Model Year2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 44 pages
Document TypeOperator's Manual
LanguageEnglish
Product BrandHusqvarna, Chainsaw
Document File TypePDF
Publisherhusqvarna.com
Wikipedia's PageHusqvarna
CopyrightAttribution Non-commercial
(2 votes, average: 3 out of 5)
Lawn and Garden readers have rated 2001-2009 Husqvarna 570 576XP Chainsaw Owners Manual 3.0 out of 5.0 based on 2 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

2001-2009 Husqvarna 570 576XP Chainsaw Owners Manual SKU UPC Model
bill warner on Apr 23, 2016.

having trouble getting past all this


sjrudy on Nov 02, 2012. Helpful

This was nice to get because I bought a used saw without any paperwork. Thanks


Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website