MAINTENANCE
Lubricating the bar tip sprocket
will reduce the oil flow and turning the screw anti-
clockwise will increase the oil flow.
Lubricate the bar tip sprocket each time you refuel. Use
the special grease gun and a good quality bearing grease.
+ –
1
2
3
Recommended settings:
Bar 18"-20":
Bar 22"-26”:
Bar 28" - :
Position 1
Position 2
Position 3
Needle bearing lubrication
WARNING! The engine must not be
running when making adjustments.
!
Cooling system
The clutch drum has a needle bearing on the output shaft.
This needle bearing must be lubricated regularly (once a
week). When lubricating, remove the clutch cover by
loosening the two bar nuts. Lay the saw on its side with
the clutch drum upwards.
To keep the working temperature as low as possible the
machine is equipped with a cooling system.
Lubrication involves engine oil dripping into the centre of
the clutch drum as it rotates.
The cooling system consists of:
1
2
3
4
5
Air intake on the starter.
Air guide plate.
Fins on the flywheel.
Cooling fins on the cylinder.
Cylinder cover (directs cold air over the cylinder).
5
4
3
Adjustment of the oil pump
2
The oil pump is adjustable. Adjustments are made by
turning the screw using a screwdriver or combination
spanner. The machine is supplied from the factory with
the screw set to position 2. Turning the screw clockwise
1
Clean the cooling system with a brush once a week, more
often in demanding conditions. A dirty or blocked cooling
system results in the machine overheating which causes
damage to the piston and cylinder.
English – 37
| Categories | Chainsaw Manuals, Husqvarna Chainsaw Manuals |
|---|---|
| Tags | Husqvarna 385XP, Husqvarna 385XPG, Husqvarna 390XP, Husqvarna 390XPG |
| Model Year | 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Husqvarna, Chainsaw |
| Document File Type | |
| Publisher | husqvarna.com |
| Wikipedia's Page | Husqvarna |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)