Poulan 2250 2450 2550 Chainsaw Owners Manual

Muffler Diffuser
Spark
MAINTENANCE SCHEDULE
Lubricate bar
Arresting
Screen
sprocket hole  . . . . . . . After each use
Muffler
Check:
Cover
Fuel mixture level . . . . Before each use
Bar lubrication. . . . . . . Before each use
Chain tension . . . . . . . Before each use
Chain sharpness  . . . . Before each use
For damaged parts  . . Before each use
For loose caps  . . . . . . Before each use
For loose fasteners. . . Before each use
For loose parts . . . . . . Before each use
Inspect and Clean:
Screws
Muffler
Body
Muffler
Cover
Cleaning is required every 25 hours of opera-
tion or annually, whichever comes first.
S  Loosen and  remove  the  2  muffler  cover
screws.
Bar  . . . . . . . . . . . . . . . . Before each use
Complete saw. . . . . . . After each use
Air filter . . . . . . . . . . . . . Every 5 hours*
Chain brake  . . . . . . . . Every 5 hours*
Spark arrestor screen
S  Remove the muffler cover (cover snaps off
muffler body).
S  Remove muffler diffuser and spark arresting
screen assembly.  Notice the orientation  of
these parts for reassembling.
and muffler  . . . . . . . . . Every 25 hours*
Replace spark plug  . Yearly
Replace fuel filter . . . Yearly
S  Clean the spark arrestor screen with a wire
brush. Replace screen if breaks are found.
S  Replace  any  broken  or  cracked  muffler
parts.
*
Hours of Operation
S  Reinstall diffuser and spark arrestor screen
assembly with round holes facing up.
S
AIR FILTER
CAUTION:
Reinstall muffler cover and 2 screws. Tight-
Do not clean filter in gasoline
en securely.
or other flammable solvent to avoid creating
a fire hazard or producing harmful evapora-
tive emissions.
CARBURETOR ADJUSTMENTS
Your carburetor is equipped with limiter caps.
Carburetor adjustment is a  complicated task.
We recommend that you take your unit  to an
authorized service dealer. Damagewill occurif
you turn the needles beyond the limiter stops.
Cleaning the air filter:
A dirty  air filter decreases  engine  perform-
ance  and increases  fuel consumption  and
harmful emissions. Always clean after every
BAR MAINTENANCE
5
hours of operation.
If your saw cuts to one side, has to be forced
through the cut, or been run with an improper
amount of bar lubrication it may be necessary
to service your bar.   A worn bar will damage
your chain and make cutting difficult.
After each use, ensure ON/STOP switch is in
theSTOPposition,thenclean   allsawdust  from
the guide bar and sprocket hole.
S  Clean the cover and the area around  it to
keep dirt and sawdust from falling into the
carburetor chamber when the cover is re-
moved.
S  Remove the parts as illustrated below.
S  Wash the filter in soap and water. Rinse in
clean cool water. Air dry completely before
reinstalling.
To maintain guide bar:
S  Lightly oil  air filter before  installing  to im-
prove the  efficiency of  the air filter.   Use
S  Move ON/STOP switch to the STOP  posi-
tion.
2--cycle
engine oil  or motor oil (SAE  30).
S  Loosen and remove chain  brake nuts and
chain brake.   Remove bar and  chain from
saw.
Squeeze excess oil from filter.
S  Reinstall parts.
Cylinder
Cover
Air Filter
S
Clean the oil holes and bargroove aftereach
5 hours of operation.
Screws
Remove Sawdust From
Guide Bar Groove
Cylinder
Cover
Sprocket Hole
Oil Holes
INSPECT  MUFFLER  AND   SPARK
ARRESTING SCREEN
As the unit is used, carbon deposits build up
on the  muffler and  spark arresting  screen,
and must be removed to avoid creating a fire
hazard or affecting engine  performance.
Replace the spark arresting screen if breaks
occur.
S  Add lubricant  to  sprocket hole  after each
use.
S  Burring of guide barrails is a normal process
of rail wear. Remove these burrs with a flat
file.
S  When rail top is uneven, use a flat file to re-
store square edges and sides.
14
Product Specification
CategoriesChainsaw Manuals, Poulan Chainsaw Manuals
Tags, ,
Model Year2001
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 17 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandPoulan. Poulan US phone support. Wheeled (Mowers, Tractors, Tillers): 1-800-849-1297 Handheld (Chainsaws, Trimmers): 1-800-554-6723 , Chainsaw
Document File TypePDF
Publisherpoulan.com
Wikipedia's PagePoulan
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website