Poulan Farmhand 2050 2150 Chainsaw Owners Manual

To stop  the  engine  move  the ON/STOP
FUELING & LUBRICATION
switch to the STOP position.
To start the engine  hold the saw firmly  on
the  ground as  illustrated.    Make  sure the
chain is free  to turn without  contacting  any
object.
FUELING ENGINE
engine   is   certified   to  operate   on
gasoline.     Before    operation,
This
unleaded
gasoline must  be mixed with a good quality
Use only 15”---18” of rope per pull.
Hold saw firmly while pulling starter  rope
2-cycle
air-cooled
engine
oil.
We
recommend
POULAN/WEED
EATERR
brand oil. If you do not use this oil, use agood
quality 2-cycle air-cooled  oil designed to be
mixed  at  a  ratio  of  40:1  (A 40:1  ratio  is
obtained by  mixing 3.2 ounces  of oil with 1
gallon of  unleaded gasoline).  When mixing
fuel  follow  the  instructions  printed  on  the
container. Always read and follow the safety
rules relating to fuel before fueling your unit.
BAR AND CHAIN LUBRICATION
The bar and chain  require continuous lubri-
cation.  Lubrication  is provided by the auto-
matic oiler system  when the oil tank is kept
filled. Lack of oil will quickly ruin the bar and
chain.  Too  little  oil will  cause  overheating
shown by smoke coming from the chain and/
or discoloration of the bar.
IMPORTANT POINTS TO REMEMBER
When pulling the starter rope, do not use the
full extent  of the rope as this can cause the
rope to break.  Do  not let starter rope  snap
back. Hold the handle and let the rope rewind
slowly.
In freezing weather oil will thicken, making it
necessary  to thin  bar and  chain oil  with a
small amount (5 to 10%) of #1 Diesel Fuel or
NOTE: Do not attempt  to cut material with
the fast idle lock button in the locked position.
kerosene.
Bar and  chain oil  must be  free
STARTING  A   COLD   ENGINE  (or
warm  engine  after running  out  of
fuel).
flowing for the oil system to pump enough oil
for adequate lubrication.
Genuine  POULAN  or POULAN  PRO  bar
and chain oil is recommended to protect your
unit against  excessive wear  from heat and
Move ON/STOP switch to the ONposition.
Pull choke knob out to the  full extent.
Slowly press primer bulb 6 times.
Squeeze  and  hold  throttle  trigger.  With
thumb press fast  idle lock down; then  re-
lease throttle trigger.
S
S
S
S
friction.
resists
POULAN  or  POULAN  PRO  oil
temperature   thinning.       If
high
POULAN or POULAN PRO bar and chain oil
is not available, use agood grade SAE 30 oil.
S  Never use waste oil for bar and chain lubri-
cation.
S
S
Sharply pull the starter rope handle 5times
with your right hand.
Push the choke knob in completely (to the
OFF position); pull the starter rope until the
engine starts.
S  Always stop the  engine before  removing
the oil cap.
MPORTANT
S  Allow the engine to run for approximately 5
seconds.
Then,  squeeze  and  release
Experience  indicates  that alcohol--blended
fuels  (called  gasohol  or  using  ethanol  or
methanol) can attract  moisture which leads
to separation  and formation of  acids during
throttle trigger to  allow engine to return to
idle speed.
Fast idle lock button
storage.
Acidic  gas can  damage  the fuel
To
system  of an  engine while  in storage.
Throttle
lock--out
avoid  engine   problems,  the   fuel  system
should  be  emptied  before  storage  for  30
days or longer. Drain the gas tank,  start the
engine and  let it run until  the fuel  lines and
carburetor are  empty.   Use fresh fuel  next
Choke knob
Throttle
trigger
season.
See STORAGE  section  for addi-
tional information.
IGNITION SWITCH
SIDE VIEW
STARTING
ON
WARNING: he chain must not move
when the  engine runs  at idle  speed.  If the
chain moves at idle speed refer  to CARBU-
RETOR ADJUSTMENT within  this manual.
Avoid contact with the  muffler. A hot muffler
can cause serious burns.
STOP
9
Product Specification
CategoriesChainsaw Manuals, Poulan Chainsaw Manuals
Tags, ,
Model Year2001
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 17 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandPoulan. Poulan US phone support. Wheeled (Mowers, Tractors, Tillers): 1-800-849-1297 Handheld (Chainsaws, Trimmers): 1-800-554-6723 , Chainsaw
Document File TypePDF
Publisherpoulan.com
Wikipedia's PagePoulan
CopyrightAttribution Non-commercial
(1 votes, average: 5 out of 5)
Lawn and Garden readers have rated Poulan Farmhand 2050 2150 Chainsaw Owners Manual 5.0 out of 5.0 based on 1 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

Poulan Farmhand 2050 2150 Chainsaw Owners Manual SKU UPC Model
Mike on May 09, 2018. Poulan Farmhand 2050 2150 Chainsaw Owners Manual

Nothing to it. Easy, Free. You can't beat it.
Thanks


Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website