2001 Poulan Pro 295 Chainsaw Owners Manual

CLEANING THE SPARK
MAINTENANCE SCHEDULE
ARRESTING SCREEN
Lubricate bar
Clean every 25 hours of operation or annually,
sprocket hole  . . . . . . . After each use
whichever comes first.
Check:
S  Loosen and  remove the  2  muffler cover
screws.
Fuel mixture level . . . . Before each use
Bar lubrication. . . . . . . Before each use
Chain tension . . . . . . . Before each use
Chain sharpness  . . . . Before each use
For damaged parts  . . Before each use
For loose caps  . . . . . . Before each use
For loose fasteners. . . Before each use
For loose parts . . . . . . Before each use
Inspect and Clean:
S  Remove the muffler cover (cover snaps off
muffler body).
S  Remove muffler diffuser and spark arres-
tingscreen  assembly. Notice  the orienta-
tion of parts for reassembling.
S  Clean the spark arrestingscreen with a wire
brush. Replace screen if breaks are found.
S  Replace any  broken  or  cracked  muffler
parts.
Bar  . . . . . . . . . . . . . . . . Before each use
Complete saw. . . . . . . After each use
Air filter . . . . . . . . . . . . . Every 5 hours*
Chain brake  . . . . . . . . Every 5 hours*
Spark arresting screen
S  Reinstall  diffuser  and  spark  arrestings-
creen assembly with  holes facing up and
toward muffler cover.
S  Reinstall  muffler  cover   and  2  screws.
Tighten securely.
and muffler  . . . . . . . . . Every 25 hours*
Replace spark plug  . Yearly
CARBURETOR ADJUSTMENTS
Replace fuel filter . . . Yearly
Your  carburetor   is  equipped   with  limiter
*
Hours of Operation
caps.
Carburetor  adjustment  is a  compli-
AIR FILTER
cated task.   We recommend  that  you take
your  unit to  an  authorized  service  dealer.
Damage will occur if you turn the needles be-
yond the limiter stops.
CAUTION:    Do not clean filter in gasoline
or other flammable solvent to avoid creating
a fire hazard or producing harmful evapora-
tive emissions.
BAR MAINTENANCE
If your saw cuts to one side, has to be forced
through the cut, or been run with an improper
amount of  bar lubrication  it may be  neces-
sary to service your bar. A wornbar will dam-
age your chain and make cutting  difficult.
Cleaning the air filter:
A dirty  air filter decreases  engine  perform-
ance  and increases  fuel consumption  and
harmful emissions. Always clean after every
5
hours of operation.
After each use,  ensure ON/STOP switch is
in the STOP position, then clean all sawdust
from the guide bar and sprocket  hole.
To maintain guide bar:
S  Clean the cover and the area around  it to
keep dirt and sawdust from falling into the
carburetor chamber when the cover is re-
moved.
S  Remove the parts as illustrated below.
S  Wash the filter in soap and water. Rinse in
clean cool water. Air dry completely before
reinstalling.
S
Move ON/STOP switch to the STOP posi-
tion.
S  Loosen and remove chain brake nuts and
chain brake.  Remove bar and chain from
saw.
S  Reinstall parts.
S  Clean the oil holes and bargroove aftereach
5
hours of operation.
Air Filter
Remove Sawdust From
Guide Bar Groove
Sprocket Hole
Oil Holes
Air Filter
Screws
S  Add lubricant to  sprocket hole after  each
use.
INSPECT  MUFFLER  AND   SPARK
ARRESTING SCREEN
As the unit is used, carbon deposits build up
on the  muffler and  spark arresting  screen,
and must be removed to avoid creating a fire
hazard or affecting engine  performance.
Replace the spark arresting screen if breaks
occur.
S  Burring  of  guide  bar  rails  is   a  normal
process of rail wear. Remove these burrs
with a flat file.
S
When rail top is uneven, use a flat file to re-
store square edges and sides.
File Rail Edges
and Sides
Square
Spark Arresting Screen
Worn Groove
Correct Groove
Replace guide bar when the groove is worn,
the guide  bar is  bent or  cracked,  or when
excess heating or burring of the rails occurs.
14
Product Specification
CategoriesChainsaw Manuals, Poulan Pro Chainsaw Manuals
Tags
Model Year2001
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 17 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandPoulan Pro. Poulan Pro US phone support. Wheeled (Mowers, Tractors, Tillers, Snow Throwers): 1-800-849-1297, Handheld (Chainsaws, Trimmers, Blowers, Edgers): 1-800-554-6723, Chainsaw
Document File TypePDF
Publisherpoulanpro.com
Wikipedia's PagePoulan
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website