ASSEMBLY
Assembling the loop handlebar
(326C)
Assembling and dismantling the
two-part shaft (326LDX)
Assembling:
•
Position the handle on the
shaft. Note that the handle
must be mounted below
the arrow on the shaft.
• Make sure the handle is
loose.
•
•
Fit the bolt, securing plate
and wing nut as shown in
the diagram.
• Guide the cut-out on the
lower section of the shaft
into the coupling‘s
locking plate on the
upper section of the
Tighten the wing nut.
shaft. The sections are
then locked together.
•
Tighten the handle.
Dismantling
•
•
•
•
Undo the handle (at least
three turns).
Press the handle towards
the coupling.
Carefully twist the lower
section out of the lock.
Assembling the loop handlebar
326LX, 326LDX)
Hold both parts of the
shaft and pull out the
lower section from the
coupling.
(326L,
•
Clip the loop handle onto
the shaft. Note that the
loop handle must be fitted
between the arrows on the
shaft.
Assembly of the trimmer head
It is extremely important that
the disc drive’s/support
flange’s guide engages
correctly in the cutting
equipment’s centre hole
when assembling the cutting
equipment. Cutting
•
•
Slide the spacer into the
slot in the loop handle.
326L
: Fit the nut,
X-series
knob and bolt. Do not
overtighten.
equipment assembled
incorrectly can result in
serious and/or fatal personal
injury.
•
Now adjust the trimmer to
give a comfortable working
position. Tighten the bolt/
knob.
!
WARNING!
Under no circumstances may the cutting
equipment be used without an approved
guard fitted. See the chapter “Technical
data”. If the wrong guard or a defective
guard is fitted this can cause serious
personal injury.
12
– English
| Categories | Chainsaw Manuals, Husqvarna Chainsaw Manuals |
|---|---|
| Tags | Husqvarna 326C, Husqvarna 326L, Husqvarna 326LD, Husqvarna X-Series |
| Model Year | 2002, 2003, 2004, 2005, 2006 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Husqvarna, Chainsaw |
| Document File Type | |
| Publisher | husqvarna.com |
| Wikipedia's Page | Husqvarna |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)