ASSEMBLY
INSTALLDISCHARGECHUTE/CHUTEROTATERHEAD
INSTALL WEIGHT BAG
NOTE:Themulti-wrenchprovidedinyourpartsbagmaybe
Though seldom required, the weight bag will reduce the
tendency of the auger housing to ride up on hard, icy drifts.
Should conditions require it, install as follows:
used to install the chute rotater head.
1.
Place discharge chute assembly on top of chute base
with discharge opening toward front of snow thrower.
1. Shut off engine and wait for all moving parts to stop.
2. Fill weight bag with desired amount of sand.
2
. Position chute rotater head over chute bracket. If
necessary, rotate chute assembly to align square and
pin on underside of chute rotater head with holes in
chute bracket.
3.
Place weight bag on top of auger housing with mount-
ing clamp at front edge of auger housing as shown.
4.
Insert weight bag between the auger housing and the
bar of the mounting clamp as shown and secure with
3.
With chute rotater head and chute bracket aligned,
position chute rotater head on pin and threaded stud of
mounting bracket.
5/16-18
x 1-1/2 capscrews. Tighten securely.
IMPORTANT: Mount the weight bag in a location which
does not cover the warning decals on top of the auger
housing.
4.
Install 3/8 washer and locknut on threaded stud and
tighten securely.
CHUTE
MOUNTING
CLAMP
BAR
ROTATER
HEAD
3/8
LOCKNUT
3/8
WASHER
WEIGHT
BAG
CHUTE
BRACKET
PIN
THREADED
STUD
ROTATER HEAD
MOUNTING
BRACKET
5/16-18
x 1-1/2
CAPSCREWS
AUGER HOUSING
CHECK TIRE PRESSURE
The tires on your snow thrower were overinflated at the
factory for shipping purposes. Correct and equal tire
pressure is important for best snow throwing performance.
•
Reduce tire pressure to 14-17 PSI.
7
Categories | Husqvarna Snow Blower Manuals, Snow Blower Manuals |
---|---|
Tags | Husqvarna 8024ST |
Model Year | 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 |
Download File |
|
Document Type | Owner's Manual |
Language | English |
Product Brand | Husqvarna, Snow Blower |
Document File Type | |
Publisher | husqvarna.com |
Wikipedia's Page | Husqvarna |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)