Poulan 1950 1975 2050 2055 2075 2150 2155 2175 2350 2375 2150PR Chainsaw Owners Manual

Reduced Kickback Symmetrical  Guide Bar
can be caused by allowing contact of the bar
tip in the danger  zone with any hard object.
Kickback can also be caused by pinching the
sawchain along the top of the guide bar. This
action may push  the guide bar rapidly back
toward the operator.  Either of  these events
may cause  you to  lose control  of  the saw
which could  result in serious injury  or even
death.  DO NOT RELY UPON ANY OF THE
DEVICES BUILT INTO  YOUR SAW.  YOU
SHOULD USE THE SAW PROPERLY AND
Small Radius Tip
Symmetrical Guide Bar
CAREFULLY TO  AVOID KICKBACK.
Re-
duced--kickback  guide bars  and  low--kick-
back  saw chains  reduce  the  chance  and
magnitude   of  kickback   and  are   recom-
mended. Your saw has a low kickback chain
and bar as original equipment. Repairs  on a
chain brake  should  be made by  an autho-
rized servicing dealer.  Take your unit to the
place of  purchase if purchased  from a ser-
vicing  dealer, or  to the  nearest authorized
master service dealer.
S  Tipcontactinsomecasesmaycause    alight-
ning fast reverse REACTION, kicking guide
bar up and back toward operator.
S  Pinching the saw chain along the top of the
guide bar  may push  the guide bar  rapidly
back toward the operator.
Large Radius Tip
S  Low--Kickback  Chain,  designed   with  a
contoured  depth  gauge   and  guard  link
which  deflect  kickback  force  and  allow
wood to gradually ride into the cutter. Low--
Kickback  Chain  has  met  kickback  per-
formance requirements  when tested on a
representative  sample of chain  saws be-
low 3.8 cubic inch displacement  specified
in ANSI B175.1.
Contoured
Depth Gauge
Elongated Guard Link
Deflects
kickback force
and allows wood
to gradually ride
into cutter
Either of these reactions may cause you to
lose control of the saw which could result in
serious injury. Do not rely  exclusively upon
devices built into your saw.
Low---Kickback
Chain
S
WARNING:
Computed  kickback
angle (CKA)listedon yoursawandlisted   inthe
CKA table below represents angle of kickback
your  bar and  chain  combinations  will have
when tested in accordance with  CSA (Cana-
dian Standards  Association) and ANSI stan-
dards. When purchasing replacement bar and
chain, considerations  should be given  to the
lower CKA values. Lower CKA values  repre-
sent safer angles to the user, higher values in-
dicate more  angle and higher  kick energies.
Computed  angles represented  indicate  total
energy and angle associated withoutactivation
of the chain brake during  kickback. Activated
anglerepresentschain  stoppingtime relativeto
activation angle  of chain break  and resulting
kick angle of saw. In all cases lower CKA val-
ues represent a  safer operating environment
for the user.
Can Obstruct Material
Not a Low---Kickback Chain
S  Front Hand Guard, designed to reduce the
chance of yourleft hand contacting thechain
if your hand slips off the front handlebar.
S  Position of front and rear  handlebars, de-
signed with distance between handles and
“in-line” with each  other.  The spread and
“in-line” position of the  hands provided by
this design work  together to give balance
and resistance  in  controlling the  pivot of
the saw back toward  the operator if kick-
back occurs.
CHAIN BRAKE AND CKA ANGLE
S  Chain Brake, designed to stop the chain in
the event of kickback.
WARNING:
WE  DO  NOT REP-
The following  guide bar and  chain combina-
tions  meet  kickback  requirements  of  CSA
Standards Z62.1, Z62.3, & ANSI B175.1 when
used on saws listed in this manual. Use of bar
and chain combinations other than those listed
is not  recommended and  may not meet  the
CKA requirements per standard.
RESENT  AND  YOU  SHOULD  NOT AS-
SUME  THAT  THE  CHAIN  BRAKE  WILL
PROTECT  YOU  IN  THE   EVENT  OF  A
KICKBACK.  Kickback is a lightning fast ac-
tion which throws the bar and rotating chain
back and up toward the operator.  Kickback
Computed kickback angle (CKA) Table
BAR
MODEL
P/N
Length
14!
CHAIN P/N
952051209
CKA without chain brake
24_
1
950/1975/2050
2055/2075/
952044368
9
52044370
16!
18!
952051211
952051338
19_
14_
2150/2150PR
2155/2175/
9
52044418
2350/2375
5
Product Specification
CategoriesChainsaw Manuals, Poulan Chainsaw Manuals
Tags, , , , , , , , , ,
Model Year2002
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 17 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandPoulan. Poulan US phone support. Wheeled (Mowers, Tractors, Tillers): 1-800-849-1297 Handheld (Chainsaws, Trimmers): 1-800-554-6723 , Chainsaw
Document File TypePDF
Publisherpoulan.com
Wikipedia's PagePoulan
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website