Replacing the Scraper
2
Note: If the rotor blades are partially or completely worn,
replace the rotor blades when you replace the scraper. This
ensures proper snowthrower operation and performance.
1
1.
2.
3.
Stop the engine and wait for all moving parts to stop.
Remove the key from the switch.
m-5061a
Remove the control panel and disconnect the wire from
the spark plug. Refer to steps 3 through 5 of Replacing
the Spark Plug on page 19.
Figure 24
1.
Control panel
2.
Mounting screws (3)
4.
5.
Tip the snowthrower forward onto its front housing.
4.
5.
Lift off the panel, allowing it to hang on the recoil rope.
Remove the 3 carriage bolts and the locknuts that hold
the scraper in place (Fig. 23).
Lift up the shroud and disconnect the wire from the
spark plug (Fig. 25).
1
3
1
2
m-5535
Figure 23
2
1.
2.
Carriage bolt (3)
Locknut (3)
3. Scraper
m-5529
6.
7.
Remove the old scraper by sliding it to the right and
down.
Figure 25
1.
Shroud
2. Spark-plug wire
Install a new scraper to the housing using the bolts and
the locknuts you previously removed.
6.
Clean any debris from around the base of the spark
plug.
8.
Connect the wire to the spark plug.
Install the control panel.
9.
7.
8.
Remove the spark plug.
10.
Insert the key in the switch.
Examine the spark plug and replace it if it is cracked,
fouled, dirty, or if the electrodes are worn.
Replacing the Spark Plug
Important
Do not clean the electrodes because grit
could enter the cylinder and damage the engine.
Use a NGK BPMR4A or equivalent spark plug. Install a
new spark plug before each season.
9.
Set the gap between the electrodes on the spark plug at
0.030 in. (0.76 mm) as shown in Figure 26.
1.
2.
3.
Stop the engine and wait for all moving parts to stop.
Remove the key from the switch.
Remove the 3 mounting screws that secure the control
panel to the housing (Fig. 24).
19
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 3650, Toro 38518 |
| Model Number | 38518 |
| Model Year | 2002 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English, Français |
| Serial Number | 220000001 - 220999999 |
| Product Name | Toro CCR 3650 GTS Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | CCR 1000/2400/2500, Single Stage, Snowthrower |
| Swath | 20 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Toro |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Model # | R-tek |
| Engine Motor Size | 6.5 hp |
| Engine Motor Type | 2 Cycle EPA1 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)