Oil Type: SAE 30 or 10W-30 detergent oil (API service
SG, SH, SJ, or higher)
1
Crankcase Capacity: 20 oz. (0.6 l)
2
Changing the Oil
3
1.
1.
2.
Start the engine and let it run for five minutes. This
warms the oil so it drains better.
4
Park the machine on a level surface, stop the engine
and pull the wire off of the spark plug (Fig. 18).
m–5453
Clean around the oil dipstick and remove it (Fig. 10).
Figure 19
1.
2.
Knob
3.
4.
Paper element
Foam element
Cover
2
1
3.
Slide the foam element off of the paper cartridge and
clean it as follows:
A. Wash the foam element in a solution of liquid soap
and warm water, squeezing it to remove dirt, but do
not twist because it may tear.
Figure 20
B. Rinse the element thoroughly in clear water.
1.
Oil dipstick
2. Metal end
C. Dry the element by wrapping it in a clean rag,
squeezing the rag and element.
3.
Clean the area around the drain plug (Fig. 21).
Important
Do not oil either element.
4.
Clean the paper element by tapping it on a hard
surface to knock the dirt out of it.
Do not wash the paper element, or clean it
Important
with solvent such as kerosene. Do not use pressurized air
to clean it. Cleaning it with any of these methods could
damage the element.
5.
6.
7.
Install the foam element over the paper element.
Install the elements into the air cleaner.
Install the air cleaner cover, securing it with the knob.
1
Important
Do not start the engine without the air
m–5463
cleaner elements installed otherwise extreme engine wear
and damage will result.
Figure 21
1.
Drain plug
Changing Engine Oil
4.
5.
Place a drain pan under the drain plug to catch the oil.
Change oil after the first 5 operating hours and then every
Remove the oil drain plug and allow oil to flow into
the drain pan.
50
operating hours thereafter or yearly whichever comes
first.
6.
7.
When finished, install the drain plug and wipe up any
oil that spilled.
Note: Change oil more frequently when operating
conditions are extremely dusty or sandy.
Slowly pour only enough oil (about 20 oz. (0.6 l)) into
the dipstick tube to raise the level to the F (full) mark.
15
| Categories | Blower Vacuum and Sweeper Manuals, Toro Blower and Vacuum Manuals |
|---|---|
| Tags | Toro 62925 |
| Model Number | 62925 |
| Model Year | 2003, 2004, 2005 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 230000001 - 230999999, 240000001 - 240999999, 250000001 - 250999999 |
| Product Name | 206cc OHV Vacuum Blower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Blowers, Vacuums |
| Product Type | Blower, Vacuum |
| Product Series | Gas Powered, Lawn Vacuum / Sweeper / Blower |
| Swath | 76cm |
| Discharge | 1000 cfm/28 cu.m/min |
| Engine Manufacturer | Briggs & Stratton |
| Engine Motor Model # | 126402-0245-E1 |
| Engine Motor Size | 5.5 hp |
| Engine Motor Type | 4 Cycle EPA1 |
| Transmission Speed | 1 Speed |
| Transmission Type | Capstan |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)