ASSEMBLY / PRE-OPERATION
Read these instructions and this manual in its entirety before you attempt to assemble or operate your new snow thrower.
Your new snow thrower has been assembled at the factory with the exception of those parts left unassembled for shipping
purposes. All parts such as nuts, washers, bolts, etc., necessary to complete the assembly have been placed in the parts
bag. To ensure safe and proper operation of your snow thrower, all parts and hardware you assemble must be tightened
securely. Use the correct tools as necessary to ensure proper tightness.
REMOVE SNOW THROWER FROM CARTON
SPEED CONTROL ROD
1.
Remove all accessible loose parts and parts boxes
from carton.
RETAINER
SPRING
2.
3.
Cut down all four corners of carton and lay panels flat.
Remove all packing materials except plastic tie holding
speed control rod to lower handle.
4.
Remove snow thrower from carton and check carton
thoroughly for additional loose parts.
HOW TO SET UPYOUR SNOW THROWER
TOOL BOX (See Fig. 11)
A toolbox is provided on your snow thrower.The toolbox is
located on top of the belt cover. Store the extra shear bolts,
nuts and multi-wrench provided in parts bag in the toolbox.
SPEED
CONTROL
BRACKET
SPEED
CONTROL
LEVER
NOTE: The multi-wrench may be used for assembly of the
chuterotatorheadtosnowthrowerandmakingadjustments
to the skid plates.
FIG. 2
INSTALL TRACTION DRIVE CONTROL ROD
(See Figs. 3 and 4)
UNFOLD UPPER HANDLE
1.
Raiseupperhandletotheoperatingpositionandtighten
handle knobs securely.
The traction drive control rod has the long loop on the end
of the spring as shown.
INSTALL SPEED CONTROL ROD (See Figs. 1 and 2)
1. Slide rubber sleeve up rod and hook end of spring into
pivot bracket with loop opening down as shown.
1.
2.
Remove plastic tie securing rod to lower handle.
2.
With top end of rod positioned under left side of control
panel,pushroddownandinsert topendofrodintohole
in drive control bracket. Secure with retainer spring.
Insert rod into speed control bracket and secure with
retainer spring.
SPEED
CONTROL
ROD
PLASTIC TIE
TRACTION DRIVE
CONTROL ROD
UPPER
HANDLE
RUBBER
SLEEVE
HANDLE
KNOB
LOWER
HANDLE
LOOP
OPENING
DOWN
PIVOT
BRACKET
FIG. 1
5
FIG. 3
| Categories | Husqvarna Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Husqvarna 9027STEXP |
| Model Year | 2004, 2005, 2006, 2007 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Husqvarna, Snow Blower |
| Document File Type | |
| Publisher | husqvarna.com |
| Wikipedia's Page | Husqvarna |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)