The chain brake should snap into both positions.If
strong resistance is felt or lever does not move into
either position, DO NOT USE YOUR SAW. Take it imme-
diately to an authorized servicing dealer.
3
CHAIN CATCHER
This unit is fitted with a chain catcher below the drive
spocket. This is intended to stop the rearward movement of
the chain in case of breakage or if it should come out of the
bar. It should never be removed.
L. Chain sharpening
1
Chain cutter teeth can be sharpened with a round file,
as follows:
Do not allow the file to touch the chain as you bring it
back to re-position it. Each cutter tooth should be filed
with the same number of strokes.
The file should be held horizontally to the cutter tooth
being sharpened.
Best results to obtain a precise sideways angle can be
obtained by holding the file so that it rises 0,5 mm above
the top face of the cutter tooth.
CHAIN
FILE
3
4
MP 370 GLX
PM 320 GX
5/32”
3/16”
The exact chain type is marked on the bottom half of the
drive link which runs inside the bar groove.
Filing can be made easier by also using a file holder.
The chain can remain fitted on the bar during sharpening.
Before commencing, the chain should be tensioned cor-
rectly and the chain brake should be activated to prevent
the chain from moving.
5
DEPTH GAUGE
Correct depth gauge height is vital to ensure maximum
chain life and cutting efficiency.
The height of the depth gauge should be lowered as the
cutter tooth is filed back; this height should be checked
every 4 or 5 sharpenings.
The best way to do this is to use a flat file and a depth
gauge tool.
The correct setting is 0.65 mm below the top edge of the
cutter tooth.
2
To obtain a correct sharpening the file must be carefully
held to maintain 3 basic angles:
– “
– “
– “
File in one direction only, from the “inside” of the cutter
tooth towards the “outside”.
A” Top angle
B” External, side angle
C” Internal, side angle
30° - 35°
85° - 90°
60°
The cutter tooth depth gauge should then be rounded (D).
Specification
THIS PRODUCT MEETS THE SAFETY STANDARD REQUIREMENT
OF THE EUROPEAN MACHINERY DIRECTIVE
DISPLACEMENT (cm
3
)
38
40x30
1,5
40
41x30
1,75
8.500
11.000
2.800
5
42
41x32
2
46
43x32
2,4
BORE AND STROKE (mm)
ENGINE OUTPUT (kW) (ISO 7293)
ENGINE SPEED AT MAX POWER (min
MAXIMUM SPEED (min
MINIMUM SPEED (min
DRY WEIGHT (Kg) (NO BAR AND CHAIN)
CHAIN PITCH (9,525 - 8,255 mm)
CHAIN GAUGE (mm)
-1
)
8.500
11.000
2.800
5
9.000
12.000
2.800
5,5
9.000
11.000
2.800
5,5
-1
)
-1
)
3/8”
.325”
1,3
3/8”-.325”3/8”-.325”
1,3
1,3
40/45
6/7
1,3
40/45
6/7
BAR LENGTHS (cm)
35/40/45
6
40/45
7
No. OF SPROCKET TEETH
OIL TANK CAPACITY (cm
3
)
290
290
390
97
290
390
98
290
390
98
FUEL TANK CAPACITY (cm
3
)
390
SOUND PRESSURE LEVEL (AT THE OPERATOR’S EAR). LpAav (dBA) (EN 27182 - EN 608)
GUARANTEED SOUND POWER LEVEL LwAav (dBA) (ISO 9207 - EN 608)
MEASURED SOUND POWER LEVEL LwAav (dBA) (ISO 9207 - EN 608)
97
112
112
111
8,7
112
111
6,9
113
112
6,9
111
VIBRATION LEVEL (ISO 7505 - EN 608) (m/s
2
)
7,5
EC Declaration of Conformity
The undersigned, authorised by E.O.P.I., declares that the petrol-driven chainsaw MS 38E, MS 40E, MS 42E, MS
46E,
manufactured by E.O.P.I., 23868 Valmadrera (LC), Via Como 72, Italy, is in accordance with the European Directives
(Machinery Directive), 73/23/EEC (Low Voltage Directive), 93/68/CEE (CE Marking Directive) &
(Directive on electromagnetic compatibility). Directive 2000/14/ECC (Annex V).
98/37/CEE
89/336/CEE
Valmadrera, 15.12.01
Pino Todero (Direttore Tecnico)
E.O.P.I.
ENGLISH - 6
| Categories | Chainsaw Manuals, Mac Chainsaw Manuals, McCulloch Chainsaw Manuals |
|---|---|
| Tags | California 461, California 540, California 542E, EMcCulloch 540, Euromac S42, Euromac S43, Euromac S44, Mac 538E, Mac 540E, Mac 542E, Mac 545E, McCulloch 40, McCulloch 46 California P538E, McCulloch 460, McCulloch 461, McCulloch 538E, McCulloch 540E, McCulloch 542E, McCulloch 545E, McCulloch 545E Promac 40, McCulloch P538E, Promac 46, Titanium 460 |
| Model Year | 2004, 2005, 2006, 2007 |
| Download File |
|
| Language | English |
| Product Brand | McCulloch. Support Phone for US: Wheeled (Mowers, Tractors, Tillers, Snow Throwers) - 1-800-849-1297
McCulloch Handheld (Chainsaws, Trimmers, Blowers, Edgers) - 1-800-554-6723 All McCulloch Products - 1-800-521-8559, Chainsaw |
| Document File Type | |
| Publisher | mcculloch.com |
| Wikipedia's Page | McCulloch Motors |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)