Husqvarna 10527STE Snow Blower Owners Manual

Do not put hands or feet near or under rotating parts.
Keep clear of the  discharge opening and front auger
area at all times.
Do not overload  the machine capacity by attempting
to clear snow at too fast a rate.
Never operate the machine  at high transport speeds
on slippery surfaces. Look behind and use care when
backing up.
Exercise extreme caution when operating on or cross-
ing gravel drives, walks or roads. Stay alert for hidden
hazards or traffic.
Never direct discharge at bystanders or allow anyone
in front of the unit.
After striking a foreign object, stop the engine (motor),
remove wire from  the spark plug, thoroughly  inspect
snow thrower for any damage, and repair the damage
before restarting and operating the snow thrower.
Disengage power  to  the auger/impeller  when snow
thrower is transported or not in use.
Use only  attachments and accessories  approved by
the manufacturer of the snow thrower (such as wheel
weights,counterweights,cabs,tirechains,electricstart
kits, etc.).
If the unit should start to  vibrate abnormally, stop the
engine (motor) and check immediately  for the cause.
Vibration is generally a warning of trouble.
Stop the engine (motor) whenever you leave the oper-
ating position,  before  unclogging the  auger/impeller
housing  or discharge  chute  and  when making  any
repairs, adjustments, or inspections.
Never operate the snow thrower without good visibility
or light.Always be sure of your footing and keep a firm
hold on the handles. Walk; never run.
Do not overreach. Keep proper footing and balance at
all times.
When cleaning, repairing, or inspecting, make certain
all controls are disengaged and the auger/impeller and
all moving parts have  stopped. Disconnect the spark
plug wire and keep the wire away from the spark plug
to prevent accidental starting.
This snow thrower is for use on sidewalks, driveways
and other ground level surfaces.
Donotusethesnowthroweronsurfacesaboveground
level such as roofs of residences, garages, porches or
other such structures or buildings.
Take all possible precautions  when leaving the snow
throwerunattended.Disengagetheauger/impeller,stop
engine (motor), and remove key.
MAINTENANCE AND STORAGE
Do not run  the engine (motor)  indoors, except when
starting  the engine  (motor) and  for transporting  the
snow thrower in or out of the building.Open the outside
doors.
Check shear bolts and other bolts at frequent intervals
for proper tightness to be sure the equipment is in safe
working condition.
Neverstorethesnowthrowerwithfuelinthetankinside
a building where ignition sources are present such as
hot water and space heaters, clothes dryers, and the
like. Allow the engine (motor) to cool before storing in
any enclosure.
WARNING:   Exhaust  fumes  are  dan-
gerous (containing CARBON MONOX-
IDE,anODORLESSandDEADLYGAS).
Always refer  to  operator’s guide  instructions for  im-
portant details if  the snow thrower is to be  stored for
an extended period.
Do not clear snow across the face of slopes. Exercise
extreme caution when  changing direction on  slopes.
Do not attempt to clear steep slopes.
Maintain or  replace safety and  instruction labels, as
necessary.
Neveroperatethesnowthrowerwithoutproperguards,
plates or other safety protective devices in place.
Run  the snow  thrower,  with auger  engaged,  a few
minutes after throwing snow to clear the machine and
prevent freeze-up of the auger/impeller.
Never  operate the  snow  thrower near  glass  enclo-
sures, automobiles, window wells, drop–offs, and the
like without proper adjustment of the snow discharge
angle. Keep children and pets away.
CONGRATULATIONS on  your purchase of a  new snow
thrower.Ithasbeendesigned,engineeredandmanufactured
to give best possible dependability and performance.
PRODUCT SPECIFICATIONS
Gasoline Capacity  4.0 Quarts
and Type:
Unleaded Regular only
Should  you experience  any  problem you  cannot  easily
remedy, please  contact your  nearest authorized  service
center/department. We have competent, well-trained tech-
nicians and the proper tools to service or repair this unit.
Oil Type
(API SG–SL):
SAE 30 (above 40°F)
SAE 5W-30 or 10W-30 (0° to +40°F)
SAE 0W-30 (below 0°F)
Please read and retain this manual.  The instructions  will
enable you to assemble and  maintain your snow thrower
properly.  Always observe the “SAFETY RULES”.
Oil Capacity:
Spark Plug:
28 Ounces
ChampionRJ19LM  (Gap:  .030")
SERIAL NUMBER: ___________________________
DATE OF PURCHASE:  _______________________
CUSTOMER RESPONSIBILITIES
THEMODELANDSERIALNUMBERSWILL  BEFOUND
ONADECALATTACHEDTOTHEREAROFTHE   SNOW
THROWER HOUSING.
Read and observe the safety rules.
Follow a  regular schedule  in maintaining,  caring for
and using your snow thrower.
Follow the instructions under“Maintenance”and“Stor-
age” sections of this owner’s manual.
YOUSHOULDRECORDBOTHSERIALNUMBERAND
DATE OF PURCHASE AND KEEP IN A  SAFE PLACE
FOR FUTURE REFERENCE.
3
Product Specification
CategoriesHusqvarna Snow Blower Manuals, Snow Blower Manuals
Tags
Model Year2004, 2005, 2006, 2007, 2008, 2009
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 32 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandHusqvarna, Snow Blower
Document File TypePDF
Publisherhusqvarna.com
Wikipedia's PageHusqvarna
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website