Poulan Pro PP3816 AV PP4218 AV Chainsaw Owners Manual

Replace guide bar when the groove  is worn,
the guide bar is bent or cracked, or when ex-
cess heatingor burringoftherails  occurs.Ifre-
placementis necessary,useonlytheguidebar
specified for your saw in the repair parts list or
on the decal located on the chain saw.
Cylinder
Cover
Air Filter
Cover
CHECK FUEL MIXTURE LEVEL
S  See FUELING  ENGINE under  the  OP-
ERATION section.
Air Filter
LUBRICATION
Bar Oil
Fill Cap
INSPECT  MUFFLER  AND   SPARK
ARRESTING SCREEN
S  See GUIDE BAR AND CHAIN OIL under
As the unit is used, carbon deposits build up
on the muffler  and spark arresting screen,
and must be removedto avoidcreating afire
hazard or affecting engine performance.
Replacethespark  arrestingscreen ifbreaks
occur.
the OPERATION section.
INSPECT AND CLEAN UNIT AND
DECALS
S  After each  use, inspect  complete  unit for
loose or damaged parts. Clean the unit and
decals using a damp cloth with a mild deter-
gent.
Spark
Arresting  Outlet
Exhaust
S  Wipe off unit with a clean dry cloth.
Screen
Cover
CHECK CHAIN BRAKE
See  CHAIN  BRAKE in  the  OPERATION
section.
CLEAN AIR FILTER
CAUTION: Donotcleanfilter  ingasolineor
other flammable solvent to avoid creating a
firehazardor  producing harmfulevaporative
emissions.
Nut
Muffler
CLEANING  THE  SPARK ARREST-
ING SCREEN
Cleaning the air filter:
A dirty air filter decreases the life and perfor-
mance of the engine andincreases fuelcon-
sumption  and harmful  emissions.  Always
clean your air filter after 10 tanks of fuel or 5
hours of  operation, whichever comes  first.
Clean more frequently in dusty conditions.A
used  air  filter   can  never  be  completely
cleaned. It is advisable to replaceyour air fil-
ter withanew oneafter every 50hours ofop-
eration, or annually, whichever comes first.
Cleaning is required every  25 hours of op-
eration or annually, whichever comes first.
1.
Loosen and remove the nut from the ex-
haust outlet cover.
2.
3.
Remove the exhaust oulet cover.
Removespark arrestingscreen.Handle
screen carefully to prevent damage.
Clean the spark arresting screen gently
with  a wire  brush.  Replace screen  if
breaks are found.
4.
1.
2.
3.
4.
Loosen 3 screws on cylinder cover.
Remove cylinder cover.
5.
6.
Replace any broken or cracked muffler
parts.
Reinstall spark arresting screen, exhaust
outlet cover,and nut.Tighten nutsecurely.
Remove air filter cover and air filter.
Cleantheair  filter usinghotsoapywater.
Rinsewithcleancoolwater.Air   drycom-
pletely before reinstalling.
REPLACE SPARK PLUG
The  spark plug  should  be replaced  each
year to ensure the engine starts easier and
runs better. Ignition timing is fixed and non-
adjustable.
5.
6.
Reinstall air filter and air filter cover.
Reinstall cylinder cover  and 3 screws.
Tighten securely.
1.
2.
3.
4.
Loosen 3 screws on cylinder cover.
Remove the cylinder cover.
Pull off the spark plug boot.
Remove spark  plug from  cylinder and
discard.
15
Product Specification
CategoriesChainsaw Manuals, Poulan Pro Chainsaw Manuals
Tags,
Model Year2004
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 19 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandPoulan Pro. Poulan Pro US phone support. Wheeled (Mowers, Tractors, Tillers, Snow Throwers): 1-800-849-1297, Handheld (Chainsaws, Trimmers, Blowers, Edgers): 1-800-554-6723, Chainsaw
Document File TypePDF
Publisherpoulanpro.com
Wikipedia's PagePoulan
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website