7
Operation
Note: Determine the left and right sides of the
machine from the normal operating position.
Mixing Gasoline and Oil
This snowthrower uses a 50:1 gasoline-to-oil mixture.
Use Toro 50:1 2-Cycle Oil (Fuel Stabilizer Added)
or an equivalent high-grade, NMMA TCW-certified
two-cycle oil.
Important: To prevent engine damage, do not use
automotive oil (such as SAE 30 or 10W30) or fuel
mixed at the wrong gasoline-to-oil ratio.
Starting the Engine
1.
Turn the ignition key
clockwise to the On
position.
1.
unleaded gasoline into an approved fuel container.
Pour a half US gallon (1.9 liters) of fresh,
2.
Add two-cycle oil to
the gasoline according
to the chart below:
m-6189
2.
Move the choke
lever to the right.
3.
Firmly push in the
primer 2 times with your
thumb, holding the
primer in for a second
before releasing it each
time.
m-6188
50:1
Gasoline-to-Oil Ratio Mixing Chart
m-6108a
Gasoline
Oil
4.
Start the engine using either the electric-start
1
US gallon (3.8 liters)
US gallons (7.6 liters)
2.6 ounces (80 ml)
5.2 ounces (160 ml)
button or the recoil starter.
2
3.
Install the cap on the fuel container.
4.
Shake the container to mix the gasoline and oil
thoroughly.
5.
Slowly remove the cap and add the remaining
amount of gasoline.
m-6190
Note: Do not mix gasoline and oil in the fuel tank. Oil
at room temperature mixes easier and more
thoroughly than cold oil. Oil below 32°F (0°C) requires
additional mixing.
m-6191a
or
Filling the Fuel Tank
Fill the fuel tank with a fresh mixture of gasoline and
oil mixed at the proper ratio.
m-6109a
Important: Run the electric starter no more than
times at intervals of 5 seconds on, then 5 seconds
10
off. Running the electric starter extensively can
overheat and damage it. If the engine does not start
after this series of attempts, wait at least 40 minutes
to allow the starter to cool before attempting to start it
again. If the engine does not start after the second
series of attempts, take the snowthrower to an
Authorized Service Dealer for service.
5.
With the engine running, move the choke lever to
the left slowly.
m-6106
3329-459
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38536, Toro CCR 2450 |
| Model Number | 38536 |
| Model Year | 2004 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 240000001 - 240999999 |
| Product Name | Toro CCR 2450 GTS Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | CCR 1000/2400/2500, Single Stage, Snowthrower |
| Swath | 20 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Toro |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Model # | R-tek |
| Engine Motor Size | 5 hp |
| Engine Motor Type | 2 Cycle EPA2 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3)
Lawn and Garden readers have rated Toro CCR 2450 GTS 38536 Snow Blower Operators Manual, 2004 3.0 out of 3.0 based on 1 product reviews. Website good