Toro CCR 3650 GTS 38538 Snow Blower Operators Manual, 2004 – Finnish

11
Adjusting the Cable
Inspecting the Rotor
Blades
1.
Unhook the end of
the control cable from
the control bar.
Before each season, inspect the rotor blades for
wear. When a rotor blade edge has worn down to the
wear indicator hole (A), have an Authorized Service
Dealer replace the rotor blades and the scraper.
m-5519
2.
Move the Z-fitting (A) to a higher or lower hole as
needed to obtain a 1/16 to 1/8 in. (2 to 3 mm) gap
between the control bar and the handle.
A
m-6202
A
B
Note: Moving the Z-fitting higher decreases the gap
between the control bar and the handle; moving it
lower increases the gap.
3.
Replace the spring cover and hook the end of the
control cable into the bottom hole of the control bar.
4.
Check the adjustment (refer to Checking the
Cable on page 10).
Note: After extended use, the drive belt may wear
and lose its proper belt tension. If the drive belt slips
(continuously squeals) under a heavy load, increase
the belt tension by inserting the spring end into the
top hole of the control bar. The belt may slip (squeal)
in wet conditions; to dry out the drive system, start
the rotor and run it without a load for 30 seconds.
3329-471
Product Specification
CategoriesSnow Blower Manuals, Toro Snow Blower
Tags,
Model Number38538
Model Year2004
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 12 pages
Document TypeOperator's Manual
LanguageFinnish
Serial Number240000001 - 240999999
Product NameToro CCR 3650 GTS Snowthrower
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower
Product TypeSnowthrower
Product SeriesCCR 2000/3000/3600, Single Stage, Snowthrower
Swath20 inch
DischargeSingle Stage
Engine ManufacturerToro
Engine Oil TypeToro 2 cycle / NMMA-TCW3
Engine Motor Model #R-tek
Engine Motor Size6.5 hp
Engine Motor Type2 Cycle EPA2
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website