ASSEMBLY
Fitting the loop handle
Fitting the trimmer guard and
trimmer head
•
Position the handle on the shaft. Note that the handle
must be mounted below the arrow on the shaft.
•
Fit the correct trimmer guard (A) for use with the trimmer
head.
Hook the trimmer guard/combination guard onto the fitting
on the shaft and secure with the bolt (L).
•
•
Fit the screw, securing plate and wing nut as shown in the
diagram.
•
•
Fit the drive disc (B) on the output shaft.
Tighten the wing nut.
Turn the blade shaft until one of the holes in the drive disc
aligns with the corresponding hole in the gear housing.
Fitting the trimmer head
•
•
Insert the locking pin (C) in the hole to lock the shaft.
When fitting the cutting attachment it is extremely important
that the raised section on the drive disc/support flange
engages correctly in the centre hole of the cutting attachment.
If the cutting attachment is fitted incorrectly it can result in
serious and/or fatal personal injury.
Screw on the trimmer head/plastic blades (H) in the
opposite direction to the direction of rotation.
H
H
•
To dismantle, follow the instructions in the reverse order.
WARNING! Never use a cutting attachment
without an approved guard. See the chapter
on Technical data. If an incorrect or faulty
guard is fitted this can cause serious
personal injury.
!
10
– English
Categories | Chainsaw Manuals, Husqvarna Chainsaw Manuals |
---|---|
Tags | Husqvarna 223L |
Model Year | 2005, 2006, 2007, 2008, 2009, 2010, 2011 |
Download File |
|
Document Type | Operator's Manual |
Language | English |
Product Brand | Husqvarna, Chainsaw |
Document File Type | |
Publisher | husqvarna.com |
Wikipedia's Page | Husqvarna |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)