ASSEMBLY / PRE-OPERATION
INSTALLDISCHARGECHUTE/CHUTEROTATERHEAD
(See Fig. 7)
NOTE: The multi-wrench provided in your parts bag may
be used to install the chute rotater head.
CHUTE
SPRING
1/4-20
SHOULDER
BOLT
DEFLECTOR
NYLON
WASHER
HOOK BETWEEN
HEX NUTS
1.
Place discharge chute assembly on top of chute base
with discharge opening toward front of snow thrower.
CABLE
EYELET
ON CHUTE
ROTATER HEAD
2.
Positionchuterotaterheadoverchutebracket. Ifneces-
sary,rotatechuteassemblytoalignsquareandpinonun-
dersideofchuterotaterheadwithholesinchutebracket.
1/4-20
LOCK-
NUT
5/16-18
CARRIAGE
BOLT
3.
4.
With chute rotater head and chute bracket aligned,
position chute rotater head on pin and threaded stud
of mounting bracket.
REMOTE
CABLE
BRACKET
Install 3/8 washer and locknut on threaded stud and
tighten securely.
CHUTE
ROTATER
HEAD
3/8
LOCKNUT
FLAT
WASHER
3/8
WASHER
5/16-18
LOCKNUT
FIG. 9
INSTALL WEIGHT BAR (See Fig. 10)
Though seldom required, the weight bar will reduce the
tendency of the auger housing to ride up on hard, icy drifts.
Should conditions require it, install as follows:
CHUTE
BRACKET
1. Shut off engine and wait for all moving parts to stop.
PIN
2.
Secure weight bar to auger housing with carriage bolts
and hex nuts as shown. Tighten securely.
THREADED
STUD
WEIGHT
BAR
CARRIAGE
BOLTS
ROTATER HEAD
MOUNTING
BRACKET
FIG. 7
INSTALL CHUTE DEFLECTOR REMOTE CONTROL
(See Figs. 8 and 9)
1.
2.
3.
Install remote cable bracket to discharge chute with
5/16-18
carriage bolt, flat washer and 5/16-18 locknut
as shown. Tighten securely.
Install remote cable eyelet to chute deflector with
1/4-20
shoulder bolt, nylon washer and 1/4-20 locknut
as shown. Tighten securely.
Install spring hooks between hex nuts on chute rotater
head and into hole in chute deflector as shown.
HEX NUTS
CHUTE
DEFLECTOR
CONTROL
LEVER
AUGER HOUSING
FIG.10
CHECK TIRE PRESSURE
Thetiresonyoursnowthrowerwereoverinflatedatthefac-
tory for shipping purposes. Correct and equal tire pressure
is important for best snow throwing performance.
•
Reduce tire pressure to 14–17 PSI.
FIG. 8
7
| Categories | Poulan Pro Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Poulan Pro PP1130ES |
| Model Year | 2005 |
| Download File |
|
| Language | English |
| Product Brand | Poulan Pro. Poulan Pro US phone support. Wheeled (Mowers, Tractors, Tillers, Snow Throwers): 1-800-849-1297, Handheld (Chainsaws, Trimmers, Blowers, Edgers): 1-800-554-6723, Snow Blower |
| Document File Type | |
| Publisher | poulanpro.com |
| Wikipedia's Page | Poulan |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)