General Specifications
Kawasaki, 4-cycle, 3.7 (2.7 kw) air cooled OHV engine, 3600 RPM, 7.57 cu in.
(124 cc) displacement, cast iron cylinder sleeve; electronic ignition with integral
lighting coil; maximum noise suppression muffler; 83 dB(A) at operator’s ear
Engine
Fuel capacity
Traction drive
2.64 qt. (2.5 l); regular grade unleaded gasoline
“A” section “V” belt on 2.0 P.D. and 3.70 P.D. to countershaft (1. 85:1) 18T and
48T gear) 2.67:1 and 20T and 56T gear (2 . 8:1). All gears 16 pitch, 20_ involute
full depth, 1/2 in. (13 mm) wide. Gears running in oil.
“A” section V-belt on 2.0 P.D. and 3.70 P.D. to countershaft (1. 85:1) 3/8 in. pitch x
3/16 in. wide chain on 20T and 14T sprockets from countershaft. Reduction Engine
to Reel – 1.30:1.
Reel Drive
Reel Clutch
Engaging jaw-type, hand operated at transaxle.
Ground speed
2.1 mph (3.4 Km/hr) at 1600 RPM and 4.0 mph (6.4 Km/hr.) at 3100 RPM.
6
sections running on ball bearings.
in. (15.2 cm) diameter solid rubber on 16 gauge (1.5 mm) steel rims. Two
Traction drum
Reduction, Engine to
Traction Drum
13.86:1
Traction Drive Clutch
Differential
Friction Disk type – Hand operated latch and bail at handle.
Enclosed spur gears
7/8
panel.
in. diameter, 17 gauge welded steel tubing with formed steel reinforcement
Handle
Traction unit construction Cast aluminum housing.
Cast aluminum and zinc side plates, aluminum extrusion back plate. Reel unit
independent of traction unit and catcher. 3-1/2 in. (89 mm) diameter 9 blade,
welded tubular construction. Reel blades, high carbon heat treated steel. Reel
bearings, taper roller with adjustment.
Reel construction
Width of cut
Height of cut
Clip frequency
21 in. (53.3 cm)
1/8 to 11/16 in. (3 to 17 mm).(Optional micro-cut bedknife 1/16” to 11/16”)
0.197 in. (5.0 mm).
Single edge high carbon steel knife, extra hard for long life, screwed to extruded
aluminum one-piece bed bar and back plate.
Bedknife/bedbar
2
replaceable wear sleeves.
in. (51 mm) O.D. Steel tube with ball bearings, moisture excluding oil seals and
Front Rollers
Weight
186 pounds with catcher and cutting unit.
Dimensions
Width
27 in. (0.69 m)
Height
44-3/4 in. (1.1 m)
with handle
Length
60 in. (1.5 m)
including handle and
catcher
8
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro 04130, Toro 04215, Toro Greensmaster |
| Model Number | 04130, 04215 |
| Model Year | 2005 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 250000001-250999999 |
| Product Name | Toro Greensmaster 500 |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Product Type | Walk Behind Mower |
| Product Series | Toro GR 500 Series |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)