MAINTENANCE
Maintenance schedule
The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the
Maintenance section.
Daily maintenance
Weekly maintenance
Monthly maintenance
Check the brake band on the chain brake
for wear. Replace when less than 0.6 mm
On chain saws without a catalytic
converter, check the cooling system
weekly.
Clean the outside of the machine.
(0,024
point.
inch) remains at the most worn
Check that the components of the throttle
control work safely. (Throttle lockout and
throttle control.)
Check the starter, starter cord and return Check the clutch centre, clutch drum and
spring.
clutch spring for wear.
Clean the chain brake and check that it
operates safely. Make sure that the chain Check that the vibration damping
Clean the spark plug. Check that the
electrode gap is 0.5 mm (0,020 inch).
catcher is undamaged, and replace it if
necessary.
elements are not damaged.
The bar should be turned daily for more
even wear. Check the lubrication hole in
the bar, to be sure it is not clogged. Clean Lubricate the clutch drum bearing.
the bar groove. If the bar has a sprocket
Clean the outside of the carburetor.
tip, this should be lubricated.
Check that the bar and chain are getting File off any burrs from the edges of the
Check fuel hose for cracks or other
damage. Change if necessary.
sufficient oil.
bar.
Check the saw chain with regard to visible
cracks in the rivets and links, whether the
saw chain is stiff or whether the rivets and
links are abnormally worn. Replace if
necessary.
Clean or replace the spark arrestor mesh
on the muffler.
Empty the fuel tank and clean the inside.
Sharpen the chain and check its tension
and condition. Check the drive sprocket
for excessive wear and replace if
necessary.
Clean the carburetor compartment.
Empty the oil tank and clean the inside.
Clean the starter units air intake.
Clean the air filter. Replace if necessary. Check all cables and connections.
Check that nuts and screws are tight.
Check that the stop switch works
correctly.
Check that there are no fuel leaks from
the engine, tank or fuel lines.
On chain saws with a catalytic converter,
check the cooling system daily.
38
– English
| Categories | Chainsaw Manuals, Husqvarna Chainsaw Manuals |
|---|---|
| Tags | Husqvarna 455 Rancher, Husqvarna 455e, Husqvarna 460 |
| Model Year | 2006, 2007, 2008 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Husqvarna, Chainsaw |
| Document File Type | |
| Publisher | husqvarna.com |
| Wikipedia's Page | Husqvarna |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)