ASSEMBLY
Protective gloves (not provided) should be
5.
Carefully remove the chainfrom thepack-
age. Hold chain with the drive links as
shown.
worn during assembly.
ATTACHING THE BAR & CHAIN (If
not already attached)
Tip of
Bar
WARNING:
If received assembled,
repeat all steps to ensure your saw is properly
assembled and all fasteners are secure. Al-
ways wear gloves when handling the chain.
Thechainis sharp andcan cutyou evenwhen
it is not moving!
1.
Move ON/STOP switch to the STOP
position.
Loosen and remove bar knobcomplete-
ly by lifting lever and turning counter-
clockwise.
CUTTERS MUST FACE IN
DIIRECTION OF ROTATION
2.
Cutters
Depth Gauge
Drive Links
6.
7.
Place chain over and behind clutch re-
tainer, fitting the drive links in the clutch
drum sprocket.
Fit bottom of drive links between the
teeth in the sprocket in the nose of the
guide bar.
LOOSEN
8.
9.
Fit chain drive links into bar groove.
Pullguidebar forward untilchain is snug
in guide bar groove. Ensure all drive
links are in the bar groove.
3.
Remove clutch cover and plastic ship-
ping spacer (if present).
10.
Install clutch cover. Be sure adjusting
pin is in the adjusting pin hole in the
guide bar.
Clutch Cover
CAUTION: It is very important when instal-
ling the clutch cover that the adjusting pin
aligns intotheadjustingpinholeinthebar.Fail-
ure to install the clutch cover correctly may re-
sult in permanent damage to your chain saw.
Bar
Knob
Location of
shipping
spacer
Back
view of
clutch
cover
4.
Slide guide bar on bar bolts until guide
bar stops against clutch drum sprocket.
Adjusting pin
11.
Install bar knob and finger tighten only.
Once the chain is tensioned, you will
need to tighten bar knob.
CHAIN TENSION (Including units
with chain already installed)
WARNING:
Wear protective gloves
when handling chain. The chain is sharp and
can cut you even when it is not moving.
Guide bar
NOTE:
make sure the bar knob is finger tight only.
Attemptingto tensionthe chainwhen thebar
knob is tight can cause damage.
When adjusting chain tension,
Bar bolts
7
| Categories | Chainsaw Manuals, Poulan Pro Chainsaw Manuals |
|---|---|
| Tags | Poulan Pro PP3516ACX, Poulan Pro PP4218AVX |
| Model Year | 2006 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Poulan Pro. Poulan Pro US phone support. Wheeled (Mowers, Tractors, Tillers, Snow Throwers): 1-800-849-1297, Handheld (Chainsaws, Trimmers, Blowers, Edgers): 1-800-554-6723, Chainsaw |
| Document File Type | |
| Publisher | poulanpro.com |
| Wikipedia's Page | Poulan |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)