2
Preparation
•
Stop the engine whenever you leave the
operating position, before unclogging the
discharge chute, and when making any repairs,
adjustments, or inspections.
•
Thoroughly inspect the area where you will use
the snowthrower. Remove all doormats, sleds,
boards, wires, and other foreign objects.
•
•
When cleaning, repairing, or inspecting, make
certain that the rotor blades and all moving parts
have stopped.
•
•
Release the control bar to disengage the rotor
blades before starting the engine.
Do not run the engine indoors, except when
starting it and for moving the snowthrower in or
out of the building. Open the outside doors;
exhaust fumes are dangerous.
Do not operate the snowthrower without wearing
adequate winter garments. Wear footwear that
will improve your footing on slippery surfaces.
•
Handle fuel with care; it is highly flammable.
•
Do not clear snow across the face of slopes.
Exercise extreme caution when changing
direction on slopes. Do not attempt to clear steep
slopes.
–
Use an approved fuel container.
–
–
Never add fuel to a running or hot engine.
Fill the fuel tank outdoors with extreme care.
Never fill the fuel tank indoors.
•
•
Never operate the snowthrower without proper
guards, plates, or other safety protective devices
in place.
–
Replace the fuel tank cap securely and wipe up
any spilled fuel.
Never operate the snowthrower near glass
enclosures, automobiles, window wells, and
drop-offs without properly adjusting the snow
discharge angle. Keep children and pets away.
•
•
•
•
Use only the power cord supplied with the
snowthrower and a receptacle appropriate for use
with the power cord for electric-start motors.
•
•
•
•
Do not overload the machine capacity by
attempting to clear snow at too fast a rate.
Never attempt to make any adjustments while the
engine is running, except where specifically
recommended by Toro.
Look behind and use care when backing up with
the snowthrower.
Let the engine and the snowthrower adjust to the
outdoor temperature before starting to clear
snow.
Never direct the discharge at bystanders or allow
anyone in front of the unit.
Operating any powered machine can result in
foreign objects being thrown into the eyes.
Always wear safety glasses or eye shields while
operating, adjusting, or repairing the
snowthrower.
Never operate the snowthrower without good
visibility or light. Always be sure of your footing,
and keep a firm hold on the handle. Walk; never
run.
Maintenance and Storage
Operation
•
Check all fasteners at frequent intervals for
proper tightness to be sure that the equipment is
in safe working condition.
•
•
•
•
Do not put hands or feet near or under rotating
parts. Keep clear of the discharge opening at all
times.
•
Never store the machine with fuel in the fuel tank
inside a building where ignition sources are
present, such as hot water and space heaters
and clothes dryers. Allow the engine to cool
before storing in any enclosure.
Exercise extreme caution when crossing gravel
drives, walks, or roads. Stay alert for hidden
hazards or traffic.
Do not attempt to clear snow from a crushed-rock
or gravel surface. This product is intended for use
only on paved surfaces.
•
•
Always refer to this operator’s manual for
important details if the snowthrower is to be
stored for an extended period.
After striking a foreign object, stop the engine,
remove the ignition key, thoroughly inspect the
snowthrower for any damage, and repair the
damage before operating the snowthrower.
Maintain or replace safety and instruction labels
when necessary.
•
If the unit should start to vibrate abnormally, stop
the engine and check immediately for the cause.
Vibration is generally a warning of trouble.
3351-830
Rev A
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38516, Toro CCR 2450 |
| Model Number | 38516 |
| Model Year | 2006 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 260000001 - 260010000 |
| Product Name | Toro CCR 2450 GTS Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | CCR 1000/2400/2500, Single Stage |
| Swath | 20 inch |
| Discharge | Single Stage |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Model # | R-tek |
| Engine Motor Size | 141cc |
| Engine Motor Type | 2 Cycle EPA2 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro CCR 2450 GTS 38516 Snow Blower Operators Manual, 2006 5.0 out of 5.0 based on 1 product reviews. found the info i was looking for