9.
Tighten the knob.
3. Remove the broom from the housing.
10.
Ensure that the Power Shovel Plus is in the broom
mode as shown.
4.
Install the rotor in the housing by inserting the end of
the rotor onto the fitted end in the housing and rotating
the rotor until it snaps into position.
Note: You may need to adjust the length of the shaft
to comfortably operate in broom mode. Refer to
Adjusting the Power Shovel Plus Height.
ConvertingfromSweepingto
Snowthrowing
Note: The housing will flex when you install the
snowthrower rotor.
Important: Disconnect the power from the Power
Shovel Plus before performing this procedure.
5.
Tighten the bolt on the side of the housing.
1.
Remove the deflector.
6.
Loosen the lower knob on the shaft.
2.
Use a 9/16-inch wrench to remove the bolt on the side
of the housing.
7.
Rotate the handle grip to the opposite side of the shaft.
8
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38365, Toro Power Shovel Plus |
| Model Number | 38365 |
| Model Year | 2006 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 260000001 - 260999999 |
| Product Name | Toro Power Shovel Plus |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Electric Snowthrower, Snowthrower |
| Swath | 12 inch |
| Discharge | Single Stage |
| Engine Motor Size | 4 amp |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)