Poulan Pro 961980019 415324 Snow Blower Owners Manual

ASSEMBLY / PRE-OPERATION
Read these instructions and this manual in its entirety before you attempt to assemble or operate your new snow
thrower.  Reading the entire manual will familiarize you with the unit, which will assist you in assembly, operation
and maintenance of the product.
Your new snow thrower has been assembled at the factory with the exception of those parts left unassembled for shipping
purposes. All parts such as nuts, washers, bolts, etc., necessary to complete the assembly have been placed in the parts
bag. To ensure safe and proper operation of your snow thrower, all parts and hardware you assemble  must be tightened
securely. Use the correct tools as necessary to ensure proper tightness.
REMOVE SNOW THROWER FROM CARTON
SPEED CONTROL ROD
1.
Remove all  accessible loose  parts and  parts boxes
from carton.
RETAINER
SPRING
2.
3.
Cut down all four corners of carton and lay panels flat.
Removethetwo(2)screwssecuringtheaugerhousing
to the pallet.
4.
5.
6.
Removeallpackingmaterialsexceptplastictieholding
speed control rod to lower handle.
Remove the  two (2)  plastic  ties securing  the upper
handle to the pallet.
Remove snow thrower from carton and  check carton
thoroughly for additional loose parts.
SPEED
CONTROL
BRACKET
SPEED
CONTROL
LEVER
HOW TO SET UP YOUR SNOW THROWER
TOOL BOX (See Fig. 8)
FIG. 2
INSTALL TRACTION DRIVE CONTROL ROD
(See Figs. 3 and 4)
The traction drive control rod has the long loop on the end
of the spring as shown.
Slide rubber sleeve up rod and hook end of spring into
pivot bracket with loop opening down as shown.
A toolbox is provided on your snow thrower. The toolbox is
located on top of the belt cover. Store the extra shear bolts,
nuts and multi-wrench provided in parts bag in the toolbox.
NOTE: The multi-wrench may be used for assembly of the
chuterotatorheadtosnowthrowerandmakingadjustments
to the skid plates.
1.
UNFOLD UPPER HANDLE
2.   With top end of rod positioned under left side of control
panel,pushroddownandinserttopendofrodintohole
in drive control bracket.  Secure with retainer spring.
1.
Raiseupperhandletotheoperatingpositionandtighten
handle knobs securely.
INSTALL SPEED CONTROL ROD (See Figs. 1 and 2)
1.
2.
Remove plastic tie securing rod to lower handle.
Insert rod into speed control bracket and secure with
retainer spring.
TRACTION DRIVE
CONTROL ROD
SPEED
CONTROL
ROD
RUBBER
SLEEVE
PLASTIC TIE
UPPER
HANDLE
HANDLE
KNOB
LOOP
OPENING
DOWN
LOWER
HANDLE
PIVOT
BRACKET
5
FIG. 1
FIG. 3
Product Specification
CategoriesPoulan Pro Snow Blower Manuals, Snow Blower Manuals
Tags
Model Year2007
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 32 pages
LanguageEnglish
Product BrandPoulan Pro. Poulan Pro US phone support. Wheeled (Mowers, Tractors, Tillers, Snow Throwers): 1-800-849-1297, Handheld (Chainsaws, Trimmers, Blowers, Edgers): 1-800-554-6723, Snow Blower
Document File TypePDF
Publisherpoulanpro.com
Wikipedia's PagePoulan
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website