Poulan Pro 961980019 415326 Snow Blower Owners Manual

OPERATION
TO THROW SNOW (See Fig. 12)
TO MOVE FORWARD AND BACKWARD (See Fig. 14)
The auger rotation is controlled by the auger control lever
located on the right side handle.
SELF-PROPELLING, forward  and reverse movement  of
the snow thrower, is controlled by the traction drive control
lever located on the left side handle.
Squeeze auger control lever to handle to engage the
auger and throw snow.
Squeezetractiondrivecontrollevertohandletoengage
the drive system.
Release the auger control lever to stop throwing snow.
Release traction drive control lever to stop the forward
or reverse movement of the snow thrower.
AUGER
CONTROL
LEVER
SPEED and DIRECTION are controlled by the drive speed
control lever.
Press downward on the speed control lever and move
lever to desired position BEFORE engaging the trac-
tion drive control lever. Be sure lever springs back and
locks into desired position.
CAUTION: Do  not  move speed  control lever
when traction drive  control lever is engaged.
Damage to the snow thrower can result.
FIG. 12
USING THE CLEAN-OUT TOOL (See Fig. 13)
In certain snow  conditions, the discharge chute  may be-
come clogged with ice and snow. Use the clean-out tool to
dislodge this blockage.
Slower speeds are for heavier snow and faster speeds
are for light snow and transporting the snow thrower. It
is recommended that you use a slower speed until you
are familiar with the operation of the snow thrower.
When cleaning, repairing, or inspecting, make
certain  all controls  are  disengaged  and the
auger/impeller   and  all   moving  parts   have
stopped. Disconnect the spark  plug wire and
keep the wire away from the spark plug to pre-
vent accidental starting.
NOTE: When both traction drive and auger control levers
are engaged, the  traction drive control lever will  lock the
auger control lever in the engaged position. This will allow
you to release your right hand from the handle and adjust
the discharge chute direction without interrupting the snow
throwing process.
Releasetheaugercontrolleverandshutofftheengine.
Removetheclean-outtoolfromit'smountingclip.    Grasp
the tool firmly by the handle and push and twist the tool
into the discharge chute to dislodge the blockage.
TRACTION
DRIVE
DRIVE
SPEED
CONTROL
LEVER
CONTROL
LEVER
Afterthepackedsnowhasbeendislodged,returntheclean-
out tool to it's mounting clip by pushing it into the clip.
Make sure the discharge chute is pointed in a safe di-
rection (no vehicles, buildings, people, or other objects
are in the direction of discharge) before restarting the
engine.
Restart the  engine, then  squeeze the  auger control
lever to the handle to clear snow from the auger hous-
ing and the discharge chute.
FIG. 14
DISCHARGE CHUTE
TO ADJUST SKID PLATES (See Fig. 15)
NOTE:Thewrenchprovidedinyourpartsbagmaybeused
to adjust the skid plates.
Skid plates are located on each side of the auger housing
and adjust the clearance between the scraper bar and the
ground surface. Adjust skid plates evenly to proper height
for  current surface  conditions.  For  removal of  snow  in
normal conditions, such as a paved driveway or sidewalk,
place skid  plates in the  highest position (lowest  scraper
clearance) to give a 5 mm clearance between the scraper
bar and the ground.  Use  a middle position if the surface
to be cleared is uneven.
CLEAN-OUT
TOOL
MOUNTING CLIP
NOTE: It is not recommended to operate the snow thrower
overgravelorrockysurfaces.Objectssuchasgravel,rocks
or other debris, can easily be picked up and thrown by the
impeller, which can cause serious personal injury, property
damage or damage to the snow thrower.
FIG. 13
10
Product Specification
CategoriesPoulan Pro Snow Blower Manuals, Snow Blower Manuals
Tags
Model Year2007
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 32 pages
LanguageEnglish
Product BrandPoulan Pro. Poulan Pro US phone support. Wheeled (Mowers, Tractors, Tillers, Snow Throwers): 1-800-849-1297, Handheld (Chainsaws, Trimmers, Blowers, Edgers): 1-800-554-6723, Snow Blower
Document File TypePDF
Publisherpoulanpro.com
Wikipedia's PagePoulan
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website