2.
Installing theTraction
ControlLinkage
1.
Remove the hairpin cotter and washer from the lower
end of the speed control rod and insert the lower end
of the rod into the lower link arm so that the bent end
of the speed control rod faces rearward (Figure 5).
Figure7
6.
7.
Lift up on the speed control rod and insert the trunnion
into the hole in the speed selector lever (Figure 6).
Note: If the trunnion does not fit into the hole when
you lift up on the speed control rod, rotate the trunnion
upward or downward on the speed control rod until
it fits.
Secure the trunnion and upper end of the speed control
rod with the outer washer and a hairpin cotter you
previously removed.
Figure5
2.
3.
Secure the lower end of the speed control rod with the
washer and hairpin cotter that you previously removed.
Note: For easier installation, look down through the
opening in the speed selector (Figure 8).
Remove the hairpin cotter and the outer washer from
the trunnion on the upper end of the speed control
rod (Figure 6).
Figure8
1.
Speedselector
3. InstallingtheChuteControl
Rod
Figure6
1.
Unwrap the Quick Stick and rotate it so that it is upright
and in the center.
1.
2.
Speedselectorlever
Trunnion
3.
Flatwasher
Note: To make installation easier, leave the flat washer
on the trunnion (Figure 6).
2. Hold the blue trigger cap down and pull the lever fully
rearward.
4.
5.
Shift the speed selector lever into Position R2.
Note: The discharge chute and deflector should face
forward. If they do not, hold the blue trigger cap
down (but do not move the Quick Stick) and rotate the
discharge chute until they do.
Rotate the lower link arm fully upward
(counterclockwise) (Figure 7).
3.
Align the flattened back end of the long chute control
rod with the flattened front end of the short rod
that extends from the control panel so that they nest
together (Figure 9).
7
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38635, Toro Power Max 828LE |
| Model Number | 38635 |
| Model Year | 2007 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 270000001 - 270999999 |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Swath | 28 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 26 oz. (.8l) 5w-30 or 10w / API SH or higher |
| Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
| Engine Motor Model # | LH318SA-156564H |
| Engine Motor Size | 318cc |
| Engine Motor Type | 4 Cycle, 4 Cycle CARB2, EPA2 |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 2 out of 2)
Lawn and Garden readers have rated Toro Power Max 828LE 38635 Snow Blower Operators Manual, 2007 2.0 out of 2.0 based on 1 product reviews.