WORKING TECHNIQUES
3
4
Make sure the chain will not strike the ground or any
other object during or after cutting.
- If it is possible (can you turn the log?) stop cutting about
2/3 of the way through the log.
-
Turn the log and finish the cut from the opposite side.
Is there a risk of kickback?
The log is supported at one end. There is a high risk
that it will split.
5
Do the conditions and surrounding terrain affect how
safely you can stand and move about?
Two factors decide whether the chain will jam or the object
that you are cutting will split: the first is how the object is
supported before and after cutting, and the second is
whether it is in tension.
Start by cutting from below (about 1/3 of the way through).
In most cases you can avoid these problems by cutting in
two stages; from the top and from the bottom.You need to
support the object so that it will not trap the chain or split
during cutting.
-
Finish by cutting from above so that the two cuts meet.
WARNING! If the chain jams in the cut:
stop the engine! Don’t try to pull the
chain saw free. If you do you may be
injured by the chain when the chain saw
suddenly breaks free. Use a lever to open
up the cut and free the chain saw.
!
The log is supported at both ends. There is a high risk
that the chain will jam.
The following instructions describe how to handle the
commonest situations you are likely to encounter when
using a chain saw.
Cutting
The log is lying on the ground.There is little risk of the
chain jamming or the object splitting. However there is a
risk that the chain will touch the ground when you finish
the cut.
-
through).
Start by cutting from above (about 1/3 of the way
Cut all the way through the log from above. Avoid letting
the chain touch the ground as you finish the cut. Maintain
full throttle but be prepared for what might happen.
-
Finish by cutting from below so that the two cuts meet.
English – 25
| Categories | Chainsaw Manuals, Husqvarna Chainsaw Manuals |
|---|---|
| Tags | Husqvarna T435 |
| Model Year | 2008, 2009 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Husqvarna, Chainsaw |
| Document File Type | |
| Publisher | husqvarna.com |
| Wikipedia's Page | Husqvarna |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)